Joovv vs Mito Red Light: Solo 3.0 and MitoPRO X panels compared

Joovv vs Mito Red Light: the four panels side by side

Joovv’s Solo 3.0 is a 36-inch panel with two wavelengths and app control¹. Mito Red Light’s MitoPRO X comes in three sizes with the same six wavelengths, from the 14.5-inch 300X to the 43-inch 1500X^{4, 6}. The MitoPRO 1500X and 750X are the red light guide’s picks for full-body and half-body panels.

Prices are US prices on each maker’s own page, before tax, checked on October 23, 2026. Joovv’s is a sale price. Figures are the makers’ own unless a cell names a lab or an FDA record.

These links go to each brand’s own store and earn us no commission.

Joovv or Mito: which one fits which need

Each suits a different need, and this isn’t a ranking. Start with how much of your body you want to cover from one spot. Then check what you’ll need to mount it.

• You want a system of Joovv panels you can grow: Joovv Solo 3.0. It runs from an iOS and Android app with Recovery+ pulsing, ambient and alarm-clock modes¹. It also pairs with other Joovv panels by Bluetooth or cable to build a bigger setup¹. Joovv says Intertek certified its Generation 3.0 devices to IEC 60601 medical electrical safety requirements¹. The catch: it’s $1,699 on sale, $400 more than the 1500X, and Joovv rates it for moderate coverage^{1, 2, 4}. Its box has no mounting hardware, and Joovv doesn’t show what a door, wall or stand setup costs^{1, 2}.
• You want one panel for full-body sessions: MitoPRO 1500X. It’s $1,299 for a 10 by 43 inch panel that Mito rates for the full body⁴. A door hook, steel cables and straps come in the box, so you don’t need a stand⁴. It’s the red light guide’s pick for a full-body panel. The catch: Mito publishes output only at 6 inches, half the closest distance it recommends^{4, 10}. You also pay return shipping on a 25 lb panel unless you bought Mito’s optional protection⁹.
• You want your upper or lower body per session: MitoPRO 750X. It’s $749 for a 10 by 23 inch, 15 lb panel with the same six wavelengths and door kit as the 1500X⁵. The MitoPRO 750X is the guide’s pick for a half-body panel. The catch: covering your whole body means moving it between sessions or buying a second panel⁵. Mito’s spectroradiometer figure for it is less than half the consumer-meter number beside it, and its outside-lab retest is still listed as in progress^{5, 11}.
• You want your face, neck or one joint, on a table: MitoPRO 300X. It’s $449 with a tabletop stand in the box, the same six wavelengths as the bigger MitoPRO X panels and dimming from 1 to 100%^{6, 8}. Mito reports a lab average of 38.2 mW/cm² at 6 inches¹⁰. The catch: it covers only small areas, and the manual’s door-hanging steps skip it^{6, 8}. The lab’s test row lists only 660 and 850 nm, so it may not be the current six-wavelength panel¹⁰.

Joovv vs Mito output: why the numbers don’t line up

Irradiance, in mW/cm², is the light power reaching your skin, and it drops as you step back. So a figure helps only with a distance and a named meter or lab. Joovv gives over 100 mW/cm² for the Solo 3.0 and names no distance^{1, 2}. That’s Joovv’s own figure, not an independent measurement¹.

Mito shows two figures at 6 inches for each MitoPRO X size. One is from a professional spectroradiometer, and a higher one is from a consumer solar meter^4–6. For the 1500X they’re over 73 and over 160 mW/cm². For the 750X they’re over 70 and over 160, and for the 300X over 56 and over 130^4–6.

Mito also reports results from LightLab International Allentown, which Mito describes as an ISO/IEC 17025-accredited lab. Mito says it commissioned the tests at standard commercial rates and has no ownership stake in the lab¹⁰. On Sep 12, 2025, LightLab measured the 1500X at a 53.5 mW/cm² average and a 72.5 peak at 6 inches¹⁰. That’s about a third of the consumer-meter figure. It measured the 300X at a 38.2 average and a 55.9 peak¹⁰. Mito’s test-data page lists the 750X’s retest as in progress¹¹.

Two gaps remain. Every Mito figure is at 6 inches, but Mito tells you to sit 12 to 18 inches away, where output is lower and unpublished^{4, 8}. The lab’s table lists the 1500X as 42 by 9 inches and the 300X as 14 by 9 inches, each with only 660 and 850 nm¹⁰. Mito doesn’t explain the difference from its six-wavelength panels. It sends the full reports only on request, and the instrument isn’t named¹⁰.

FDA status and safety listings: listed, not cleared

FDA’s device identifier database lists the Joovv Solo 3.0 (model PT500-F0486) under product code ILY, “Lamp, Infrared, Therapeutic Heating”³. It’s listed as exempt from premarket submission, over the counter and in commercial distribution³. Joovv labels the Solo 3.0 a Class II medical device, and its product page doesn’t mention FDA clearance¹.

FDA’s registration and listing data show Mito Red Light listing the MitoPRO X series under the same ILY code¹². That’s a Class 2 device under 21 CFR 890.5500, which FDA exempts from 510(k) review¹³. The listing carries no 510(k) number¹². The 510(k) numbers on Mito’s other listings belong to its MitoGLOW mask, MitoGROW and MitoCLEAR¹². Mito’s pages call the panels “FDA Class II Registered” and also say its products “have not been evaluated by the Food & Drug Administration”^{4, 6}.

A device record or listing like these isn’t FDA clearance or approval. It also isn’t a finding that a panel works for any health use^{3, 12}.

Electrical safety is a separate question. Joovv says Intertek tested and certified its Generation 3.0 devices to applicable IEC 60601 medical electrical safety requirements, but it doesn’t publish the certificate¹. Intertek’s ETL directory lists the MitoPRO 300X, 750X and 1500X under UL 1598, a light-fixture standard, as horticultural (grow-light) luminaires¹⁴. That isn’t a medical electrical safety listing. UL’s Product iQ lists the 1500X under General Medical Equipment without naming the standards¹⁵. Mito’s product page lists IEC 60601 standards, ISO 13485 and MDSAP, with no certificate posted⁶.

Price, mounting and running costs

Joovv’s $1,699 is a sale price, checked on October 23, 2026. Its page gives $1,799 as the regular price and shows no end date^{1, 2}. Shipping and taxes are calculated at checkout¹. Mito’s three panels are $449, $749 and $1,299 with no sale, checked the same day, and Mito advertises free shipping to the lower 48 states^4–6. A 750X and 1500X bundle is $1,948, $100 less than buying both, and two of each is $3,696⁴.

Mounting is the open cost with Joovv. Its box holds the panel, a power cord, eyewear and a manual, with no mounting hardware listed¹. Door, wall, stand and tabletop-stand setups are chosen through a separate selector, and Joovv doesn’t show their prices^{1, 2}. So the cost of a mounted Solo 3.0 is unknown.

The 1500X and 750X come with an over-the-door hook, steel hanging cables and four vinyl straps, so a stand is optional^{4, 5}. Mito’s floor stand is $139 and its universal stand is $349^{4, 5}. With a stand, the 750X comes to $888 or $1,098⁵. The 300X’s tabletop stand is in the box. Mito sells the floor stand only for the 750X and 1500X, so a floor setup for the 300X means the universal stand, $798 in all^{6, 8}. Mito’s manual gives no weight limit for the door hook⁸.

Neither maker lists bulbs, filters or a subscription for these panels^{1, 4}. Mito’s App Store listing shows its app as free with no in-app purchases¹⁶. Joovv doesn’t say whether its app is free¹. At six 10-minute sessions a week, the 1500X uses about 21 kWh a year at its 418.7 W lab reading^{4, 10}. The 300X uses about 6.4 kWh at its listed 125 W⁶. Joovv lists 250 VA but no session length, so its running cost is unknown¹.

Warranty and returns

Mito’s warranty is three years from delivery on every MitoPRO X panel, for the original purchaser only⁹. Mito doesn’t repair panels or supply parts. It replaces an eligible unit, and you send back the whole product⁹. Mito pays for the return label only in the first 180 days, so after that you pay to ship a claim⁹.

Joovv’s warranty is two years, per a badge on its product page and a tag on its store^{1, 2}. The page gives no coverage terms or exclusions¹.

Both give you 60 days to send a panel back. Mito’s trial runs from delivery with no restocking fee⁹. The panel must go back in its original packaging, postmarked within the 60 days⁹. You pay return shipping unless you added Free Returns & Package Protection at checkout, and Mito doesn’t state that option’s price⁹. Shipping fees and the protection fee aren’t refunded, and shipping damage must be reported within 10 days of delivery⁹.

Joovv lists a 60-day return period on its product page and a 60-day trial on its store^{1, 2}. The product page links to a Returns page but gives no return conditions or return-shipping costs¹. Ask Joovv who pays shipping on a return before you order.

What the figures don’t tell you

Joovv doesn’t publish device-specific clinical evidence for the Solo 3.0¹. Mito’s lab results cover light output and power draw, not effects on skin, muscles or joints¹⁰. Neither tells you the dose you’ll get at the distance you sit.

Our red light evidence review covers what studies of red and near-infrared light found. The full-length panel comparison sets the Solo 3.0 and 1500X beside four other panels, and the three-year cost page covers what each device costs to own.

Sources

1. Joovv Solo 3.0 | Full Body LED Red Light Therapy Device Joovv · manufacturer
2. Joovv Solo 3.0 listing on Joovv's store (product tags, prices, weight and barcode) Joovv · manufacturer · price read from the store’s product data
3. AccessGUDID device record: Joovv Solo 3.0 (00855501008266) U.S. Food and Drug Administration / National Library of Medicine · regulator
4. MitoPRO X | Red Light Therapy Panel Series (MitoPRO 1500X) Mito Red Light · manufacturer
5. MitoPRO X | Red Light Therapy Panel Series (MitoPRO 750X) Mito Red Light · manufacturer
6. MitoPRO X | Red Light Therapy Panel Series (MitoPRO 300X) Mito Red Light · manufacturer
7. Red Light Therapy Panels | MitoPRO X, MitoPRO+ & MitoADAPT Mito Red Light · manufacturer
8. MitoPRO X user manual (January 2026) Mito Red Light, 2026 · manufacturer
9. Returns, Refund and Warranty Policies Mito Red Light · manufacturer
10. Red Light Therapy Panel Irradiance Data: Independent ISO/IEC 17025 Lab Reports Mito Red Light · manufacturer
11. Independent test data Mito Red Light · manufacturer
12. openFDA device registration and listing: Mito Red Light LLC U.S. Food and Drug Administration (openFDA) · regulator · data file
13. openFDA device classification: product code ILY (lamp, infrared, therapeutic heating) U.S. Food and Drug Administration (openFDA) · regulator · data file
14. Intertek ETL Listed Directory: Mito Red Light LLC, luminaires (UL 1598) Intertek · certifier
15. UL Product iQ: Mito Red Light LLC, file E551417 (General Medical Equipment, MDAF) UL Solutions · certifier
16. MitoRedLight app (App Store listing) Mito Red Light, via Apple App Store · manufacturer