Our pick for one area, with output you can check
PlatinumLED BIOMAX 300
Small red and near-infrared panel with lab-measured output out to 24 inches
$659
Compare with this one →Panel
Mito Red LightMitoPRO 300X
Compact six-wavelength tabletop panel for the face, neck or a joint
Source-based analysis, not hands-on testing. Our method
Cofounder of Superhuman Chambers · About the author. General information, not medical advice. No independent clinical review is claimed.
The verdict
The MitoPRO 300X is Mito's $449 entry panel, sized for the face, neck or a joint, with a tabletop stand in the box. The catch is output. Mito's top figure of over 130 mW/cm² is a solar-meter reading, and its outside lab measured a 38.2 mW/cm² average.
The trade-off
It covers only small areas, and Mito doesn't publish output at the 12 to 18 inches it recommends.
Model reviewed: MitoPRO 300X targeted 9.5 by 14.5 inch panel, with tabletop stand
$449
Check price at Mito Red Light US price, checked
No affiliate commission on this link. Check the exact variant before buying.
About this price
$449.00 is the regular price on Mito's US product page, with no sale shown. Mito's online store shows the same $449, with no markdown, and lists the panel as available. The same store lists the 750X at $749 and the 1500X at $1,299. Tax is extra, and Mito offers free shipping to the lower 48 states.
A GOOD FIT FOR
You want a small, dimmable panel for your face or a joint that sits on a table, with a three-year warranty.
- You want a small panel for your face, neck or one joint that sits on a desk or table
- You want all six MitoPRO X wavelengths, dimming and app control for the least money in the line
- You want outside lab output figures, not just a solar-meter number
THINK TWICE IF
- You want to cover your upper body, lower body or whole body in one session: Mito points you to the 750X or 1500X
- You need an FDA-cleared device, since the FDA listing shows no 510(k) for the MitoPRO X
- You want it on a door or the floor: the manual's hanging steps skip the 300X, and only the $349 universal stand fits
- You want free returns without paying for Mito's optional protection
What still needs checking
- Irradiance at the recommended 12 to 18 in
- Whether LightLab tested the current six-wavelength 300X or an earlier two-wavelength unit
- Input voltage and plug type
- Panel depth and housing material
- Whether the 300X ships with the door hook and cables in the manual's general box list
- Fan noise
- Near-infrared pulse frequency
- What the optional return protection costs
- Who tested the panel to the IEC 60601 standards Mito lists
The practical details.
| Exact variant | MitoPRO 300X targeted 9.5 by 14.5 inch panel, with tabletop stand |
|---|---|
| LEDs | 60 lenses / 120 chips. Each lens holds two chips on separate circuits, so the panel can run 100% red, 100% near infrared or 50% each |
| Peak wavelengths | 590, 630, 660, 810, 830 and 850 nm. Mito gives the split for the whole MitoPRO X series as 6%, 22%, 22%, 17%, 17% and 17% |
| Irradiance at 6 in | >130 mW/cm² by consumer solar meter and >56 mW/cm² by professional spectroradiometer. Mito reports a LightLab test (report LLIA002765-005, Sep 12, 2025) of 38.2 mW/cm² average and 55.9 mW/cm² peak over the area below the LEDs |
| Power | 125 W power consumption on the product page. The LightLab test measured 111.8 W wall draw and 36.4 W total radiant power |
| Coverage and distance | Face, neck or joints. Mito recommends 10-minute sessions at 12 to 18 in. The manual says 4 to 6 sessions a week, and the product page says 4 to 7 |
| Controls and modes | Touchscreen with three modes: all wavelengths, red and amber only, or near infrared only. The manual gives dimming from 1% to 100%, plus near-infrared pulsing. The Bluetooth app adds an NIR Extend mode of up to 20 minutes. Mito's App Store listing shows the app as free with no in-app purchases |
| In the box | Panel, tabletop stand, power cable, user manual, opaque protective goggles and Mito Red IR3 glasses |
| Dimensions | 9.5 x 14.5 in (width x height, panel only) and 7 lb, per the product page. Mito says to add about 6 to 8 in to the height if you use its floor or universal stand. It doesn't state panel depth. |
| Materials | Not stated by the manufacturer. |
Before you buy
InstallationThe 300X comes with a tabletop stand
The 300X comes with a tabletop stand. The manual says to pull it out and set the panel on a level surface. The manual's door-hanging steps cover only the 750X and 1500X. The $139 floor stand is listed for those two panels only. The $349 universal stand fits every MitoPRO X size. The panel plugs in with the supplied 16 AWG power cord. Mito doesn't state input voltage or amperage, and it doesn't call for a dedicated circuit.
WarrantyThree years on MitoPRO X panels, starting on the delivery date
Three years on MitoPRO X panels, starting on the delivery date. It covers only the original purchaser who bought from mitoredlight.com or an authorized reseller, and it can't be transferred. It covers defects in material or workmanship under normal use, but not negligence, improper maintenance, modification, theft or loss. Mito doesn't repair units or supply parts. It replaces an eligible panel with a brand-new one. You send back the whole product with all its parts. Mito pays the postage for the first 180 days. After that, you pay to ship it in. Claims start by email to info@mitoredlight.com.
Returns60 days from delivery, postmarked within the window, with no restocking fee
60 days from delivery, postmarked within the window, with no restocking fee. The panel must come back in its original packaging, and damaged or unsellable returns are refused. Return shipping is on you unless you bought Free Returns & Package Protection at checkout. The policy page doesn't price that option, and its fee isn't refunded. Original shipping fees aren't refunded either. Refunds go to your original payment method, and Mito says to allow up to 5 business days.
More about this assessment
The MitoPRO 300X is the smallest MitoPRO X panel, 9.5 by 14.5 inches, sized for the face, neck or a joint. It costs $449, with the same six wavelengths as the bigger panels and a tabletop stand in the box. Mito lists more than 130 mW/cm² at 6 inches on a solar meter, but LightLab, an outside lab it paid, measured a 38.2 mW/cm² average. No output is published at the 12 to 18 inches Mito recommends. The FDA listing has no 510(k), so it isn't cleared. You get a three-year warranty and 60 days to return it, but return shipping is on you without Mito's optional protection.
Strengths on paper
- At $449, it's the cheapest MitoPRO X, with the same six wavelengths and controls as the $1,299 1500X
- The tabletop stand, goggles and IR glasses are in the box, so you don't need to buy a stand
- Mito publishes outside lab figures next to its solar-meter number: a 38.2 mW/cm² average and 55.9 peak at 6 in
- The lab table gives an average dose of 22.92 J/cm² for 10 minutes at 6 in
- Low running cost: about 6.4 kWh a year at six 10-minute sessions a week
- Dimming from 1% to 100% and three onboard modes, with the app optional
- Three-year warranty with a brand-new replacement, and Mito pays postage on claims in the first 180 days
- 60-day trial with no restocking fee
- ETL listed by Intertek under the UL 1598 luminaire standard
Limitations
- Sized for the face, neck or a joint, so bigger areas mean several sessions
- The >130 mW/cm² figure is a consumer solar-meter peak, more than twice the lab's 55.9 mW/cm² peak
- Irradiance is published only at 6 in, but Mito tells you to sit 12 to 18 in away
- The lab test lists only 660 and 850 nm and a 14 by 9 in size, so it may not be the current six-wavelength panel
- Not FDA cleared: the listing is under product code ILY, a therapeutic heating lamp code, with no 510(k) number
- No published test backs the 'no detectable EMF' and 'flicker-free' claims
- You pay return shipping unless you bought the optional protection, and you pay to ship warranty claims after 180 days
- The product page caps near-infrared-only mode at 5 minutes, while the manual says 10
- No input voltage, panel depth or housing material is published
What it costs to own.
Adjust the assumptions for your use. Missing costs stay unknown.
PLAN YOUR OWNERSHIP COSTS
What will it cost to own?
Change the assumptions to fit your use. Leave an unknown cost blank. Add water, subscriptions, cleaning, shipping and taxes if they apply. Use average operating power, not the maximum rating.
3-year planning total
$452.45Every field has a value. This is an estimate, not a quote.
Energy component: $3.45
Purchase + installation + years × (annual consumables + annual other) + watts/1000 × hours/day × 365 × years × $/kWh. Annualized allowances, not an exact replacement schedule. Excludes taxes, shipping, finance and resale unless entered.Replacement parts & cost assumptions
No scheduled consumable is listed. That does not mean zero maintenance or repair costs.
- Purchase is the $449 list price on Oct 13, 2026. Tax is extra, and shipping is free to the lower 48 states.
- Installation is $0 because the tabletop stand is in the box and the panel plugs in with the supplied cord. A floor setup needs the $349 universal stand, which brings the upfront cost to $798.
- No bulbs, filters or refills are listed, and the manual calls the panel maintenance-free, so yearly consumables are $0. That leaves out return shipping and postage for warranty claims after 180 days.
- Other yearly costs are $0. The store sells the panel as a one-time purchase, and Mito's App Store listing shows the app as free with no in-app purchases.
- Watts uses the 125 W power consumption on the product page. Mito's LightLab test measured 111.8 W wall draw.
- Hours per day is 0.14, which assumes six 10-minute sessions a week, the top of the manual's 4 to 6. That's about 6.4 kWh a year at 125 W. Using it on more than one area a day multiplies that.
Evidence & sources.
Does red light therapy work? Our evidence review grades the research as Mixed. That grade is about the claim, not about this product.
- Manufacturer claimModel, price, specs, box contents, use guidance, warranty and return terms all come from Mito Red Light.1245 Mito's product page and manual disagree on the near-infrared-only time limit (5 and 10 minutes). The manual gives no input voltage, power rating or irradiance data.
- Manufacturer claimMito reports that LightLab International Allentown, which it describes as an ISO/IEC 17025-accredited photometric lab, tested the MitoPRO 300X on Sep 12, 2025 (report LLIA002765-005). At 6 in it measured 38.2 mW/cm² average and 55.9 mW/cm² peak, 36.4 W radiant power and 111.8 W wall draw.3 The figures come from Mito's summary page, and Mito says it paid for the tests at standard commercial rates. The full report is available only by email request and wasn't reviewed. The tested row lists 660 and 850 nm and a 14 by 9 in size. The page doesn't say whether that unit is the current six-wavelength model. It measured only at 6 in, not at the 12 to 18 in Mito recommends. The page reports no EMF or flicker results.
- Regulator recordFDA's registration and listing data show Mito Red Light LLC (registration 3015313684) listing the 'MitoPRO X Series' under product code ILY. That code is 'Lamp, Infrared, Therapeutic Heating', a Class 2 device under 21 CFR 890.5500. No 510(k) number is attached to that listing.1467 A listing isn't FDA clearance or approval, and it isn't a finding that the panel works for any health use. The 510(k) numbers in Mito's listings belong to other products: the MitoGLOW mask (K221775), MitoGROW (K222477) and MitoCLEAR (K240089). Mito's product page calls the panel 'FDA Class II Registered' and also says its products 'have not been evaluated by the Food & Drug Administration.' The manual calls Mito's lights general wellness devices. openFDA notes that its data are unvalidated.
- CertificationIntertek's ETL Listed Directory names the MitoPRO 300X among Mito Red Light LLC's products carrying the ETL Listed Mark. The listing is under the luminaires standard UL 1598, and it describes the models as a 'Horticultural Luminaire'.8 That's an electrical safety listing for a light fixture. It isn't a test of light output, a medical device standard or a finding of any health effect. The directory gives no voltage or wattage rating.
- Manufacturer claimMito's product page lists IEC 60601-1, IEC 60601-1-2, 60601-2-83, 60601-1-6, IEC TS 60601-4-2, ISO 13485 and MDSAP for the MitoPRO X. The manual lists EMC compliance with IEC 60601-1-2, CISPR 11 and IEC 61000-3-2 and -3-3.14 No certificate or test report for these standards is posted. The manual files IEC 61000-3-3 under 'voltage fluctuations/flicker emissions', which concerns the power line, not flicker in the light.
- Manufacturer claimMito says the MitoPRO X emits 'no detectable EMF' at 6 in or more. It also calls the panel flicker-free, thanks to 'specialized LED drivers'. Bluetooth is used only for the app and can be switched off.1 No meter, method or test report is published for either claim, and Mito's third-party testing page lists no EMF or flicker results.
Sources (9)
- MitoPRO X | Red Light Therapy Panel Series (MitoPRO 300X) Mito Red Light · manufacturer · checked Oct 13, 2026
- MitoPRO X store listing (variant price and availability) Mito Red Light · manufacturer · data file · checked Oct 13, 2026
- Red Light Therapy Panel Irradiance Data - Independent ISO/IEC 17025 Lab Reports Mito Red Light · manufacturer · checked Oct 13, 2026
- MitoPRO X user manual (v1.1, January 2026) Mito Red Light · manufacturer · checked Oct 13, 2026
- Returns, Refund and Warranty Policies Mito Red Light · manufacturer · checked Oct 13, 2026
- openFDA device registration and listing: Mito Red Light LLC U.S. Food and Drug Administration (openFDA) · regulator · data file · checked Oct 13, 2026
- openFDA device classification: product code ILY (lamp, infrared, therapeutic heating) U.S. Food and Drug Administration (openFDA) · regulator · data file · checked Oct 13, 2026
- Intertek ETL Listed Directory: Mito Red Light LLC, luminaires (UL 1598) Intertek · certifier · checked Oct 13, 2026
- MitoRedLight app (App Store listing) Mito Red Light, via Apple App Store · manufacturer · checked Oct 13, 2026
Other options.
Back to our red-light therapy picks →
Our pick for half your body at a time
MitoPRO 750X
Mid-size six-wavelength panel for one body half per session
$749
Compare with this one →
Our full-body panel pick
MitoPRO 1500X
Full-body six-wavelength panel with a door-hanging kit and lab-tested output
$1,299
Compare with this one →About this review. The facts on this page come from manufacturer pages, certification listings and regulator records, checked Oct 13, 2026. The sources are listed above.
Our editorial policy →