| US price | $1,995Checked Oct 23, 2026 · Price details in the review | $749Checked Oct 23, 2026 · Price details in the review |
|---|
| Three-year ownership estimate | $1,995 Incomplete known subtotal. Not included: energy use. | $755.21 Planning total. Electricity assumption: $0.18/kWh. |
|---|
| Choose if | You want one battery-powered panel with four programs, including a body-contouring mode. | You want a mid-size, door-hung panel for one body half per session, with a three-year warranty and a 60-day trial. |
|---|
| Main trade-off | A used device can't be returned, and FDA lists no clearance under the PRO PLUS name. | Full-body use means repositioning or buying the 1500X. You also pay return shipping unless you bought the optional protection. |
|---|
| Key specifications | - Panel and LEDs: 353 LEDs plus 4 green indicator lights on a 24 x 10 in flexible panel with a 16 x 8 in treatment area
- Wavelengths: Blue 465 nm, red 640 nm and near infrared 880 nm, blended by mode. Contour uses red and near infrared only
- Modes: Four: Wrinkles, Acne, Aches and Pains, and Contour. Celluma says the 3-mode PRO is essentially the same device without Contour, which is for the body and not the face
- Output: The manual lists maximum output at the source: 7.65 mW/cm² blue, 9.36 red and 1.4 near infrared. FDA summaries give 6.5 mW/cm² for the wrinkle program, and 4.2 red with 0.7 near infrared for Contour
- Session: 30 minutes, fixed, with a countdown timer. The manual advises 3 sessions a week for 4 weeks in the Wrinkles, Acne, Aches and Pains and Contour modes. Celluma's page says to use it up to 30 minutes a day
- Battery and power: 7.4 V, 7,000 mAh (50.4 Wh) lithium-ion, about 2.5 hours to charge, and it can run while plugged in. Celluma gives different battery life figures: at least 3 sessions in the manual, 3 to 4 on the page and up to 15 in the tech specs
- FDA status: Celluma says PRO PLUS is FDA cleared for body contouring, aging skin, pain and acne. FDA lists clearances under Celluma3 (K152280, K171323) and CONTOUR (K232977), and none under the PRO PLUS name
- Eye safety: Goggles come in the box and are optional per Celluma. The manual says people sensitive to bright light should wear them and that nobody should look directly at the panel. It lists IEC 62471 risk group 1
- Safety limits: The manual says the panel doesn't get warmer than 42 °C and has an IP21 rating, so it isn't waterproof. Don't use it in a bathroom, lie on it or put it under blankets or clothing
- Controls: A controller with on/standby, mode, start and pulse buttons, a charge light and a countdown. Celluma says it has a treatment timer and start and pause. Pulse is normally on at the start of a session
- In the box: PRO PLUS panel with controller, protective eye goggles, power supply with global adapters and a user manual
| - LEDs: 150 lenses / 300 chips
- Peak wavelengths: 590, 630, 660, 810, 830 and 850 nm. Mito gives the split for the whole MitoPRO X series as 6%, 22%, 22%, 17%, 17% and 17%
- Power consumption: 225 W
- Irradiance at 6 in: >70 mW/cm² by professional laboratory spectroradiometer and >160 mW/cm² by consumer-level (solar) light meter. Mito shows the two figures side by side
- Modes: All wavelengths (50% red/amber, 50% NIR), 100% red/amber or 100% NIR. NIR-only is limited to 5 minutes on the panel. The app's NIR Extend mode runs NIR for up to 20 minutes, cycling briefly to red every 4 minutes. Mito's App Store listing shows the app as free with no in-app purchases
- Coverage per session: Upper or lower body. Mito's FAQ says to stand 12 to 18 in from the panel
- In the box: Panel, power cable, user manual, over-the-door hook, steel hanging cables, 4 vinyl hanging straps, opaque protective goggles, Mito Red IR3 glasses
|
|---|
| Exact variant | large single flexible panel with 4 modes, battery-powered, device only | MitoPRO 750X single panel, 10 x 23 in, with over-the-door hook and hanging cables, no stand |
|---|
| Dimensions | The panel is 24 x 10 in with a 16 x 8 in treatment area (718.5 cm²), and it weighs 1.5 lb, per Celluma's product page. | 10 x 23 in (width x height, panel only) and 15 lb. Mito says to add about 6 to 8 in to the height when the panel sits on a floor or universal stand. Mito doesn't state panel depth. |
|---|
| Installation | None. The panel runs on an internal rechargeable lithium-ion battery, or plugged in through its USB-C power supply (13 V, 2.76 A, 36 W). A full charge takes about 2.5 hours with the unit off. Celluma's manual says to wake the battery from ship mode on first use and to charge it fully before the first session. The panel bends to the body and needs no stand. A single facial rest is sold separately for holding it in an S shape over the face. | It hangs over a door from the included over-the-door hook, steel hanging cables and 4 vinyl hanging straps. Floor and universal stands are sold separately, and you don't need one. The product page shows the floor stand at $139 and the universal stand at $349. It plugs in with the supplied power cable. Mito doesn't state input voltage, amperage or outlet requirements, and no dedicated circuit is described. |
|---|
| Materials | Polyurethane foam encloses the LEDs and a shape-taking frame, with a Lexan shield over the light panel, per Celluma's manual. | Not stated by the manufacturer. |
|---|
| Warranty | Two years from delivery, covering shipping damage, manufacturing defects and defective batteries. Celluma pays shipping both ways to an authorized repair location on a covered claim. A third year costs $89 as a 1-year extended warranty for a single panel, and Celluma's pages disagree on whether you must buy it at purchase or within a year. Accidental damage, moisture, cosmetic damage and normal battery degradation aren't covered, and unauthorized repair or modification voids the warranty. | 3-year warranty on MitoPRO X panels, starting on the delivery date. It's valid only for the original purchaser. It covers defects in material or workmanship under normal use, but not damage from negligence, improper maintenance or modification. Mito doesn't repair units or supply parts. It replaces eligible products with a new unit, and you must return the entire product with all its components. Mito pays for the return postage label only in the first 180 days. |
|---|
| Returns | 30 days from purchase to ask for a return authorization, but only an unused device qualifies. Celluma's software tracks use, and 10 minutes or more of cumulative on-time counts as used, with no refund. An unused device in damaged packaging loses 10% to a restocking fee, and a broken or tampered seal costs 20%. You call or email Celluma for authorization first. The policy doesn't say who pays return shipping. | 60-day trial from the delivery date, with no restocking fee. You get a full refund if the device goes back in its original packaging, postmarked within the 60 days. You pay return shipping unless you bought Free Returns & Package Protection at checkout. Shipping fees and the protection fee aren't refunded. |
|---|
| Unresolved questions | - Which 510(k) covers the Series 2 PRO and PRO PLUS hardware, since FDA lists the filings under Celluma3 and CONTOUR
- Operating power draw, since 36 W is only the adapter's rating
- Whether the battery can be replaced and what it costs
- Who pays return shipping on an authorized return
- Whether a US-labeled manual differs from the EU manual
- Flicker and EMF levels beyond the manual's compatibility tables
- Irradiance at a stated distance, since the manual gives output at the source only
| - Delivered irradiance at the recommended 12 to 18 in distance
- Measured wall power draw
- Input voltage and plug type
- Panel depth
- Housing material
- Fan noise
- Whether the 750X has any FDA clearance: the openFDA listing for the MitoPRO X series carries no 510(k) number
- The 750X's own outside-lab report, since Mito's test-data page lists the retest as in progress
|
|---|