| US price | $1,995Checked Oct 23, 2026 · Price details in the review | $1,299Checked Oct 23, 2026 · Price details in the review |
|---|
| Three-year ownership estimate | $1,995 Incomplete known subtotal. Not included: energy use. | $1,310.55 Planning total. Electricity assumption: $0.18/kWh. |
|---|
| Choose if | You want one battery-powered panel with four programs, including a body-contouring mode. | You want one door-hung panel for full-body sessions, with dimmable red and near-infrared light and a three-year warranty. |
|---|
| Main trade-off | A used device can't be returned, and FDA lists no clearance under the PRO PLUS name. | Mito publishes no output figure at its recommended distance, and returning the 25 lb panel costs you shipping without the optional protection. |
|---|
| Key specifications | - Panel and LEDs: 353 LEDs plus 4 green indicator lights on a 24 x 10 in flexible panel with a 16 x 8 in treatment area
- Wavelengths: Blue 465 nm, red 640 nm and near infrared 880 nm, blended by mode. Contour uses red and near infrared only
- Modes: Four: Wrinkles, Acne, Aches and Pains, and Contour. Celluma says the 3-mode PRO is essentially the same device without Contour, which is for the body and not the face
- Output: The manual lists maximum output at the source: 7.65 mW/cm² blue, 9.36 red and 1.4 near infrared. FDA summaries give 6.5 mW/cm² for the wrinkle program, and 4.2 red with 0.7 near infrared for Contour
- Session: 30 minutes, fixed, with a countdown timer. The manual advises 3 sessions a week for 4 weeks in the Wrinkles, Acne, Aches and Pains and Contour modes. Celluma's page says to use it up to 30 minutes a day
- Battery and power: 7.4 V, 7,000 mAh (50.4 Wh) lithium-ion, about 2.5 hours to charge, and it can run while plugged in. Celluma gives different battery life figures: at least 3 sessions in the manual, 3 to 4 on the page and up to 15 in the tech specs
- FDA status: Celluma says PRO PLUS is FDA cleared for body contouring, aging skin, pain and acne. FDA lists clearances under Celluma3 (K152280, K171323) and CONTOUR (K232977), and none under the PRO PLUS name
- Eye safety: Goggles come in the box and are optional per Celluma. The manual says people sensitive to bright light should wear them and that nobody should look directly at the panel. It lists IEC 62471 risk group 1
- Safety limits: The manual says the panel doesn't get warmer than 42 °C and has an IP21 rating, so it isn't waterproof. Don't use it in a bathroom, lie on it or put it under blankets or clothing
- Controls: A controller with on/standby, mode, start and pulse buttons, a charge light and a countdown. Celluma says it has a treatment timer and start and pause. Pulse is normally on at the start of a session
- In the box: PRO PLUS panel with controller, protective eye goggles, power supply with global adapters and a user manual
| - LEDs: 300 lenses with 600 chips. Mito says each lens holds two chips on separate circuits
- Wavelengths: 590, 630, 660, 810, 830 and 850 nm. The split is 6%, 22%, 22%, 17%, 17% and 17%
- Modes and dimming: The touchscreen runs all six wavelengths (half red and amber, half near infrared), red and amber only, or near infrared only. The manual says red and near infrared each dim from 1 to 100%.
- App mode (NIR Extend): The app adds NIR Extend: up to 20 minutes of near infrared with a 1-minute red break every 4 minutes. The near-infrared-only cap is given as both 5 and 10 minutes
- Irradiance at 6 in: Mito lists >73 mW/cm² by professional spectroradiometer and >160 mW/cm² by consumer meter. The lab report Mito summarizes gives 53.5 mW/cm² average and 72.5 mW/cm² peak, a 32.09 J/cm² dose in 10 minutes. No figure is published for any other distance
- Power: 445 W listed. The lab measured 418.7 W at the wall. Input voltage isn't given
- Size and coverage: 10 x 43 in and 25 lb. Mito rates it for full body, and the smaller 750X for upper or lower body
- Controls: Touchscreen with session timer, brightness control and alarm. One panel connects to the phone app by Bluetooth, and Mito's App Store listing shows the app as free with no in-app purchases. Running several panels together takes a wireless remote, which Mito includes only with 2- and 4-panel arrays
- Use guidance: 10-minute sessions at 12 to 18 in, at least 6 hours apart on the same area. The manual says 4 to 6 sessions a week, and the product page says 4 to 7. No more than 15 minutes, and never over 20
- In the box: Panel, power cable, user manual, over-the-door hook, steel hanging cables, 4 vinyl straps, opaque goggles and Mito Red IR3 glasses
- EMF and flicker: The panel is said to emit 'no detectable EMF' at 6 in or more and to be flicker-free, but no measurements are published. The manual's only flicker entry, IEC 61000-3-3, tests the panel's effect on mains power, not light flicker
|
|---|
| Exact variant | large single flexible panel with 4 modes, battery-powered, device only | single 10 by 43 inch panel, with over-the-door hook and hanging cables, no stand |
|---|
| Dimensions | The panel is 24 x 10 in with a 16 x 8 in treatment area (718.5 cm²), and it weighs 1.5 lb, per Celluma's product page. | 10 x 43 in (width x height, panel only) and 25 lb. Mito says to add about 6 to 8 in to the height on a floor or universal stand. It doesn't state the depth. Mito's lab-test table lists the panel as 42 x 9 in with only 660 and 850 nm, without explaining the difference. |
|---|
| Installation | None. The panel runs on an internal rechargeable lithium-ion battery, or plugged in through its USB-C power supply (13 V, 2.76 A, 36 W). A full charge takes about 2.5 hours with the unit off. Celluma's manual says to wake the battery from ship mode on first use and to charge it fully before the first session. The panel bends to the body and needs no stand. A single facial rest is sold separately for holding it in an S shape over the face. | An over-the-door hook, steel hanging cables and four vinyl straps come in the box, so a stand is optional. The manual shows how to hang the 1500X from a door but gives no weight limit for the hook. Mito's floor stand ($139) and universal vertical or horizontal stand ($349) fit the 1500X but cost extra. The panel plugs in with the supplied 16 AWG cord. Mito doesn't state input voltage, current draw or outlet needs, and the only electrical rating in the manual is the 10 A, 250 V fuse. The manual gives an operating range of 45°F to 115°F. |
|---|
| Materials | Polyurethane foam encloses the LEDs and a shape-taking frame, with a Lexan shield over the light panel, per Celluma's manual. | Not stated by the manufacturer. |
|---|
| Warranty | Two years from delivery, covering shipping damage, manufacturing defects and defective batteries. Celluma pays shipping both ways to an authorized repair location on a covered claim. A third year costs $89 as a 1-year extended warranty for a single panel, and Celluma's pages disagree on whether you must buy it at purchase or within a year. Accidental damage, moisture, cosmetic damage and normal battery degradation aren't covered, and unauthorized repair or modification voids the warranty. | Three years on MitoPRO X panels, starting on the delivery date, for the original purchaser only. It covers defects in material or workmanship under normal use, and negligence, improper maintenance, modification, theft and loss aren't covered. Mito doesn't repair panels or supply parts, so it replaces eligible units and you send back the whole product. Mito pays for the return label only in the first 180 days. Claims start by email to info@mitoredlight.com, and Mito may ask for photos or video of the defect. |
|---|
| Returns | 30 days from purchase to ask for a return authorization, but only an unused device qualifies. Celluma's software tracks use, and 10 minutes or more of cumulative on-time counts as used, with no refund. An unused device in damaged packaging loses 10% to a restocking fee, and a broken or tampered seal costs 20%. You call or email Celluma for authorization first. The policy doesn't say who pays return shipping. | 60-day trial from delivery, with no restocking fee. The return must be postmarked within the 60 days and go back in the original packaging. You pay return shipping unless you added Free Returns & Package Protection at checkout. Mito doesn't state that option's price. Shipping fees and the protection fee aren't refunded. Shipping damage must be reported within 10 days of delivery. |
|---|
| Unresolved questions | - Which 510(k) covers the Series 2 PRO and PRO PLUS hardware, since FDA lists the filings under Celluma3 and CONTOUR
- Operating power draw, since 36 W is only the adapter's rating
- Whether the battery can be replaced and what it costs
- Who pays return shipping on an authorized return
- Whether a US-labeled manual differs from the EU manual
- Flicker and EMF levels beyond the manual's compatibility tables
- Irradiance at a stated distance, since the manual gives output at the source only
| - Irradiance at the recommended 12 to 18 in
- Input voltage and plug type
- Panel depth and housing material
- Fan noise
- Measured light flicker and EMF
- The price of the optional return protection
- Whether the wireless remote is sold on its own, and its price
- The door hook's weight limit
- Whether the near-infrared-only cap is 5 or 10 minutes
- Which standards UL's medical equipment listing covers
- The spectroradiometer model behind the lab figures
|
|---|