SIDE BY SIDE

Compare products.

See prices, running costs, specifications and trade-offs side by side. Choose two to four products of the same type.

Change products

Product 1Product 2Product 3 (optional)Product 4 (optional)

Panel

MitoPRO 300X

MitoPRO 300X targeted 9.5 by 14.5 inch panel, with tabletop stand

$449US price, checked Oct 13, 2026

Compact six-wavelength tabletop panel for the face, neck or a joint

Check price at Mito Red Light Full review →

Panel

BON CHARGE Super Max Red Light Therapy Device

Super Max (single model), 35.5 x 11.8 x 2.56 in panel with door mount

$1,599US price, checked Oct 13, 2026

Tall two-wavelength panel with an included door mount

Check price at BON CHARGE Full review →

Criterion	MitoPRO 300X	BON CHARGE Super Max Red Light Therapy Device
US price	$449Checked Oct 13, 2026 · Price details in the review	$1,599Checked Oct 13, 2026 · Price details in the review
Three-year ownership estimate	$452.45 Planning total. Electricity assumption: $0.18/kWh.	$1,599 Incomplete known subtotal. Not included: energy use.
Choose if	You want a small, dimmable panel for your face or a joint that sits on a table, with a three-year warranty.	You want one tall panel with the mounting hardware in the box, and you have a solid door to hang it from.
Main trade-off	It covers only small areas, and Mito doesn't publish output at the 12 to 18 inches it recommends.	A one-year warranty with buyer-paid shipping on claims, only two wavelengths, and no measuring distance for irradiance, so the dose delivered at 3 to 12 inches is unknown.
Key specifications	LEDs: 60 lenses / 120 chips. Each lens holds two chips on separate circuits, so the panel can run 100% red, 100% near infrared or 50% each Peak wavelengths: 590, 630, 660, 810, 830 and 850 nm. Mito gives the split for the whole MitoPRO X series as 6%, 22%, 22%, 17%, 17% and 17% Irradiance at 6 in: >130 mW/cm² by consumer solar meter and >56 mW/cm² by professional spectroradiometer. Mito reports a LightLab test (report LLIA002765-005, Sep 12, 2025) of 38.2 mW/cm² average and 55.9 mW/cm² peak over the area below the LEDs Power: 125 W power consumption on the product page. The LightLab test measured 111.8 W wall draw and 36.4 W total radiant power Coverage and distance: Face, neck or joints. Mito recommends 10-minute sessions at 12 to 18 in. The manual says 4 to 6 sessions a week, and the product page says 4 to 7 Controls and modes: Touchscreen with three modes: all wavelengths, red and amber only, or near infrared only. The manual gives dimming from 1% to 100%, plus near-infrared pulsing. The Bluetooth app adds an NIR Extend mode of up to 20 minutes. Mito's App Store listing shows the app as free with no in-app purchases In the box: Panel, tabletop stand, power cable, user manual, opaque protective goggles and Mito Red IR3 glasses	LEDs: 300 LEDs, 5 W dual chip Wavelengths: 660 nm red and 850 nm near infrared Irradiance: >162 mW/cm² in the spec table, comparison table and product description. No measuring distance given Power and input: 1,500 W, AC 85–265 V Timer and modes: Selectable 5 to 30 minute sessions on the product page, but the store's product description says sessions of up to 20 minutes. Modes: red, near infrared or both Stated use distance: 3 to 12 in from the panel EMF and flicker: 0.05–0.1 µT EMF, with flicker listed as zero. No measuring distance given In the box: Panel, power cord, 2 braided steel cables, threaded posts, protective goggles, height-adjusting pulley, door mount
Exact variant	MitoPRO 300X targeted 9.5 by 14.5 inch panel, with tabletop stand	Super Max (single model), 35.5 x 11.8 x 2.56 in panel with door mount
Dimensions	9.5 x 14.5 in (width x height, panel only) and 7 lb, per the product page. Mito says to add about 6 to 8 in to the height if you use its floor or universal stand. It doesn't state panel depth.	91 x 30 x 6.5 cm (35.5 x 11.8 x 2.56 in) and 14 kg (31 lb), per the spec table on the product page.
Installation	The 300X comes with a tabletop stand. The manual says to pull it out and set the panel on a level surface. The manual's door-hanging steps cover only the 750X and 1500X. The $139 floor stand is listed for those two panels only. The $349 universal stand fits every MitoPRO X size. The panel plugs in with the supplied 16 AWG power cord. Mito doesn't state input voltage or amperage, and it doesn't call for a dedicated circuit.	It hangs over a door from the included door mount, using braided steel cables, threaded posts and a height-adjusting pulley. The setup text says it can also stand on a solid surface. BON CHARGE's comparison table lists 'Door Mount' as the stand option for this model, and the product page lists no floor stand. It plugs in with the supplied power cord (AC 85–265 V). No dedicated circuit is described.
Materials	Not stated by the manufacturer.	Not stated by the manufacturer.
Warranty	Three years on MitoPRO X panels, starting on the delivery date. It covers only the original purchaser who bought from mitoredlight.com or an authorized reseller, and it can't be transferred. It covers defects in material or workmanship under normal use, but not negligence, improper maintenance, modification, theft or loss. Mito doesn't repair units or supply parts. It replaces an eligible panel with a brand-new one. You send back the whole product with all its parts. Mito pays the postage for the first 180 days. After that, you pay to ship it in. Claims start by email to info@mitoredlight.com.	1-year manufacturer's warranty. The product-page FAQ says it runs from the date of purchase, but the store's refund policy says one year from delivery. To claim under the policy, you email BON CHARGE and return the product at your own cost within the warranty period. BON CHARGE then repairs, replaces or refunds at its option, and it pays shipping back on repaired or replaced items. Products used contrary to instructions, abused, modified, damaged or fitted with substitute parts aren't covered.
Returns	60 days from delivery, postmarked within the window, with no restocking fee. The panel must come back in its original packaging, and damaged or unsellable returns are refused. Return shipping is on you unless you bought Free Returns & Package Protection at checkout. The policy page doesn't price that option, and its fee isn't refunded. Original shipping fees aren't refunded either. Refunds go to your original payment method, and Mito says to allow up to 5 business days.	You can return items within 30 days of receipt for an exchange, refund or store credit, and you pay return shipping. The refund policy names no restocking fee. Items from bundles, promotions or free gifts must come back unused and in original condition. Report a faulty product within 14 days of delivery. If an item is found faulty, BON CHARGE pays the return shipping. General condition requirements for a standard return weren't confirmed.
Unresolved questions	Irradiance at the recommended 12 to 18 in Whether LightLab tested the current six-wavelength 300X or an earlier two-wavelength unit Input voltage and plug type Panel depth and housing material Whether the 300X ships with the door hook and cables in the manual's general box list Fan noise Near-infrared pulse frequency What the optional return protection costs Who tested the panel to the IEC 60601 standards Mito lists	Delivered irradiance at BON CHARGE's 3 to 12 in use distance Measured wall power draw during a session Recommended session length and frequency General condition requirements for a standard return What it costs to ship the panel back Housing material The door mount's weight rating The FDA product code or listing number behind the 'FDA Class II registered' statement

These comparisons use published specifications, not head-to-head tests. Prices and terms are dated. Unknown costs are not zero. Check the exact variant before you buy.