SIDE BY SIDE

Compare products.

See prices, running costs, specifications and trade-offs side by side. Choose two to four products of the same type.

Change products

Product 1Product 2Product 3 (optional)Product 4 (optional)

Panel

Hooga HGPRO1500

Single panel, sold as the PRO1500 in one configuration, with door mount and hanging kit, no stand

$1,199US price, checked Oct 13, 2026

Full-length red and near-infrared panel that hangs on a door, $1,199

Check price at Hooga Full review →

Panel

Kala Red Light Elite Panel

'No Stand' setup option with hanging kit, US store

$1,139.99US price, checked Oct 13, 2026

Full-length red and near-infrared panel on sale, with an unconfirmed 'FDA Cleared' badge

Check price at Kala Full review →

Panel

MitoPRO 300X

MitoPRO 300X targeted 9.5 by 14.5 inch panel, with tabletop stand

$449US price, checked Oct 13, 2026

Compact six-wavelength tabletop panel for the face, neck or a joint

Check price at Mito Red Light Full review →

Scroll the table sideways to see every product.

Criterion	Hooga HGPRO1500	Kala Red Light Elite Panel	MitoPRO 300X
US price	$1,199Checked Oct 13, 2026 · Price details in the review	$1,139.99Checked Oct 13, 2026 · Price details in the review	$449Checked Oct 13, 2026 · Price details in the review
Three-year ownership estimate	$1,211.54 Planning total. Electricity assumption: $0.18/kWh.	$1,139.99 Incomplete known subtotal. Not included: installation, energy use.	$452.45 Planning total. Electricity assumption: $0.18/kWh.
Choose if	You want a full-length 660 and 850 nm panel that hangs on a door, with output given at several distances.	You want a full-length 660 and 850 nm panel, on sale for several hundred dollars less than a Joovv Solo 3.0 or BON CHARGE Super Max, and you can hang it with the included kit and wait for delivery.	You want a small, dimmable panel for your face or a joint that sits on a table, with a three-year warranty.
Main trade-off	Its output figures aren't backed by a named test, it has no pulse or dimming, and return shipping comes out of your refund.	Power draw and the FDA badge are unclear for this model, the backorder notice leaves delivery timing uncertain, and returns need RMA pre-approval and cost a $15 restocking fee plus return shipping.	It covers only small areas, and Mito doesn't publish output at the 12 to 18 inches it recommends.
Key specifications	LEDs: 300 dual-chip LEDs, listed as 300 x 5 W, with a 60-degree beam angle Wavelengths: Each dual-chip LED holds a 660 nm red and an 850 nm near-infrared emitter. Hooga doesn't say how output splits between them Irradiance and coverage: 218 mW/cm² at 3 in, 189 at 6 in, 136 at 12 in and 102 at 18 in. Coverage grows from 43 x 14 in to 60 x 29 in over that range. Hooga names no meter, lab or method Power: 530 W power consumption on the product page, but 300 W on Hooga's comparison chart. Both give 1,500 W as the rated or 'LED power class' figure. Input is AC 85–265 V Controls: Red, near infrared or both, set with the panel's MODE button. The manual lists a 5, 10 or 15 minute timer, and the panel starts with no timer set. No pulse or brightness control, and Hooga mentions no app Use guidance: For skin, 18 in for 2 to 3 minutes per area. For deeper tissue, 6 to 12 in for 6 to 10 minutes. Hooga suggests 3 to 5 sessions a week, and no more than 2 a day EMF and flicker: Hooga claims 0.0 μT at 6 in. The product page calls the panel flicker-free, and the certifications page calls it low-flicker. No test report, instrument or method is published In the box: Panel, US power cord, series linking power cord, door mount, hanging kit with adjustable pulley, protective goggles and user manual	LEDs: 231 Wavelengths: 660 nm red and 850 nm near infrared, 1:1 ratio Irradiance: 161 mW/cm² at 6 in, per Kala. The page doesn't say who measured it or with what instrument Use distance: Kala recommends about 6 to 18 in from the panel Power: The only wattage figure is 'Light output: 385W (2315W)', but 231 x 5 W would be 1,155 W. No power-consumption figure is given. Input is 100–240 V AC, 50/60 Hz Timer and modes: 5, 10, 15 or 20 minute sessions, seven frequency settings and a pulse recovery mode. Digital timer and remote control, though the page says the panel controller doesn't include a battery EMF: '0.00 at 4 inches', with no unit given In the box*: Panel, user manual, hanging kit, protective goggles, charger and wall adapter, power cord	LEDs: 60 lenses / 120 chips. Each lens holds two chips on separate circuits, so the panel can run 100% red, 100% near infrared or 50% each Peak wavelengths: 590, 630, 660, 810, 830 and 850 nm. Mito gives the split for the whole MitoPRO X series as 6%, 22%, 22%, 17%, 17% and 17% Irradiance at 6 in: >130 mW/cm² by consumer solar meter and >56 mW/cm² by professional spectroradiometer. Mito reports a LightLab test (report LLIA002765-005, Sep 12, 2025) of 38.2 mW/cm² average and 55.9 mW/cm² peak over the area below the LEDs Power: 125 W power consumption on the product page. The LightLab test measured 111.8 W wall draw and 36.4 W total radiant power Coverage and distance: Face, neck or joints. Mito recommends 10-minute sessions at 12 to 18 in. The manual says 4 to 6 sessions a week, and the product page says 4 to 7 Controls and modes: Touchscreen with three modes: all wavelengths, red and amber only, or near infrared only. The manual gives dimming from 1% to 100%, plus near-infrared pulsing. The Bluetooth app adds an NIR Extend mode of up to 20 minutes. Mito's App Store listing shows the app as free with no in-app purchases In the box: Panel, tabletop stand, power cable, user manual, opaque protective goggles and Mito Red IR3 glasses
Exact variant	Single panel, sold as the PRO1500 in one configuration, with door mount and hanging kit, no stand	'No Stand' setup option with hanging kit, US store	MitoPRO 300X targeted 9.5 by 14.5 inch panel, with tabletop stand
Dimensions	36 x 8.6 x 3.1 in and 21 lb, per Hooga's comparison chart and the table on its product page. Hooga's online store lists a weight of 13,154 g (about 29 lb) without saying whether that includes packaging.	Listed as 'L220W96H900mm', about 8.7 x 3.8 x 35.4 in. The 96 mm figure is labeled width but reads as the panel's depth. The spec list gives the weight as 30 lb, but Kala's online store lists 9,952 g (about 21.9 lb) for every setup option.	9.5 x 14.5 in (width x height, panel only) and 7 lb, per the product page. Mito says to add about 6 to 8 in to the height if you use its floor or universal stand. It doesn't state panel depth.
Installation	A door mount and a hanging kit with an adjustable pulley come in the box. The manual says to hang the kit and panel from the door mount, then plug the panel into any outlet. Mobile stands are sold separately. Input is AC 85–265 V, and no dedicated circuit or electrician is described.	The 'No Stand' setup includes a hanging kit. The page doesn't say what it hangs from (door, wall or ceiling) or whether you'll need to drill. Roller Boot, Vertical Stand and Horizontal Stand are separate setup options at higher prices. The panel plugs in at 100–240 V AC, 50/60 Hz, and no dedicated circuit is described.	The 300X comes with a tabletop stand. The manual says to pull it out and set the panel on a level surface. The manual's door-hanging steps cover only the 750X and 1500X. The $139 floor stand is listed for those two panels only. The $349 universal stand fits every MitoPRO X size. The panel plugs in with the supplied 16 AWG power cord. Mito doesn't state input voltage or amperage, and it doesn't call for a dedicated circuit.
Materials	Not stated by the manufacturer.	Iron shell, with lenses at 30 and 60 degrees.	Not stated by the manufacturer.
Warranty	Three years on the PRO1500, per the product page, the store listing and the manual. The manual counts the three years from delivery and says the warranty covers all parts and labor. Hooga's warranty page says coverage starts on the date of purchase, with no activation step. Abuse, misuse, modification, drops and non-Hooga parts aren't covered. If Hooga needs the panel back, you pay to ship it. Claims go by email to contact@hoogahealth.com.	2 years, per the spec list on the product page. Kala's return policy says that outside the 30-day return window, its warranty program 'may cover repairs or replacements'. Final-sale items remain under warranty service, and you make a claim by emailing Kala with proof of purchase. Coverage details and exclusions weren't found. The shipping page whose web address mentions warranty gives no warranty terms.	Three years on MitoPRO X panels, starting on the delivery date. It covers only the original purchaser who bought from mitoredlight.com or an authorized reseller, and it can't be transferred. It covers defects in material or workmanship under normal use, but not negligence, improper maintenance, modification, theft or loss. Mito doesn't repair units or supply parts. It replaces an eligible panel with a brand-new one. You send back the whole product with all its parts. Mito pays the postage for the first 180 days. After that, you pay to ship it in. Claims start by email to info@mitoredlight.com.
Returns	60 days from delivery. The panel must be in the condition you received it, in its original packaging. Returns aren't free: Hooga deducts the return shipping cost from your refund once it receives the item. US customers can print a prepaid label at Hooga's discounted rates. The policy also says 'open-box items cannot be refunded'. It doesn't say whether that covers any panel you've unboxed during the 60 days or only units sold as open-box. Items that aren't in original condition, or come back after 60 days, get only a partial refund. Approved refunds go back to the original payment method within 3 to 5 business days.	You can return it within 30 days of delivery for a refund if you bought it directly from kalaredlight.com. It has to be in like-new condition, with all original accessories, manuals and packaging. You need pre-approval through Kala's RMA process first. Then you have 14 days from receiving the RMA to send it back by a trackable method. A $15 restocking fee applies to all returns, and you pay return shipping. Duties and taxes aren't refunded. Kala lists its Vertical and Horizontal Stands, and Kala Goggles, as final sale. The two policy pages give different refund timings after inspection: 5 to 10 business days, or typically within 14 business days.	60 days from delivery, postmarked within the window, with no restocking fee. The panel must come back in its original packaging, and damaged or unsellable returns are refused. Return shipping is on you unless you bought Free Returns & Package Protection at checkout. The policy page doesn't price that option, and its fee isn't refunded. Original shipping fees aren't refunded either. Refunds go to your original payment method, and Mito says to allow up to 5 business days.
Unresolved questions	How the irradiance figures were measured, and with what instrument Actual wall power draw, given the 530 W and 300 W figures How output splits between red and near infrared Housing material The door mount's weight rating Fan noise What return shipping costs for a 21 lb panel Whether 'open-box items cannot be refunded' applies to a panel you've unboxed and tried Which models the scanned FCC, CE and RoHS certificates name The FDA listing record itself, which Hooga shares only on request	Measured wall power draw during a session What the hanging kit attaches to The hanging kit's weight rating Warranty coverage details and exclusions Who pays shipping on warranty claims When it would actually ship under the backorder notice How many sessions per day or week Kala recommends (the FAQ entry on daily use showed no answer) Whether the FDA device-identifier record for 'KALA Elite' covers the unit sold on the US store, since the store's barcode doesn't match the record's identifier How the 161 mW/cm² figure was measured Delivered irradiance at 12 to 18 in, the far end of Kala's use distance Panel weight: 30 lb in the spec list, but 9,952 g (about 21.9 lb) for every setup option in Kala's online store	Irradiance at the recommended 12 to 18 in Whether LightLab tested the current six-wavelength 300X or an earlier two-wavelength unit Input voltage and plug type Panel depth and housing material Whether the 300X ships with the door hook and cables in the manual's general box list Fan noise Near-infrared pulse frequency What the optional return protection costs Who tested the panel to the IEC 60601 standards Mito lists

These comparisons use published specifications, not head-to-head tests. Prices and terms are dated. Unknown costs are not zero. Check the exact variant before you buy.