| US price | $1,599Checked Oct 13, 2026 · Price details in the review | $1,199Checked Oct 13, 2026 · Price details in the review | $1,299Checked Oct 13, 2026 · Price details in the review |
|---|
| Three-year ownership estimate | $1,599 Incomplete known subtotal. Not included: energy use. | $1,211.54 Planning total. Electricity assumption: $0.18/kWh. | $1,310.55 Planning total. Electricity assumption: $0.18/kWh. |
|---|
| Choose if | You want one tall panel with the mounting hardware in the box, and you have a solid door to hang it from. | You want a full-length 660 and 850 nm panel that hangs on a door, with output given at several distances. | You want one door-hung panel for full-body sessions, with dimmable red and near-infrared light and a three-year warranty. |
|---|
| Main trade-off | A one-year warranty with buyer-paid shipping on claims, only two wavelengths, and no measuring distance for irradiance, so the dose delivered at 3 to 12 inches is unknown. | Its output figures aren't backed by a named test, it has no pulse or dimming, and return shipping comes out of your refund. | Mito publishes no output figure at its recommended distance, and returning the 25 lb panel costs you shipping without the optional protection. |
|---|
| Key specifications | - LEDs: 300 LEDs, 5 W dual chip
- Wavelengths: 660 nm red and 850 nm near infrared
- Irradiance: >162 mW/cm² in the spec table, comparison table and product description. No measuring distance given
- Power and input: 1,500 W, AC 85–265 V
- Timer and modes: Selectable 5 to 30 minute sessions on the product page, but the store's product description says sessions of up to 20 minutes. Modes: red, near infrared or both
- Stated use distance: 3 to 12 in from the panel
- EMF and flicker: 0.05–0.1 µT EMF, with flicker listed as zero. No measuring distance given
- In the box: Panel, power cord, 2 braided steel cables, threaded posts, protective goggles, height-adjusting pulley, door mount
| - LEDs: 300 dual-chip LEDs, listed as 300 x 5 W, with a 60-degree beam angle
- Wavelengths: Each dual-chip LED holds a 660 nm red and an 850 nm near-infrared emitter. Hooga doesn't say how output splits between them
- Irradiance and coverage: 218 mW/cm² at 3 in, 189 at 6 in, 136 at 12 in and 102 at 18 in. Coverage grows from 43 x 14 in to 60 x 29 in over that range. Hooga names no meter, lab or method
- Power: 530 W power consumption on the product page, but 300 W on Hooga's comparison chart. Both give 1,500 W as the rated or 'LED power class' figure. Input is AC 85–265 V
- Controls: Red, near infrared or both, set with the panel's MODE button. The manual lists a 5, 10 or 15 minute timer, and the panel starts with no timer set. No pulse or brightness control, and Hooga mentions no app
- Use guidance: For skin, 18 in for 2 to 3 minutes per area. For deeper tissue, 6 to 12 in for 6 to 10 minutes. Hooga suggests 3 to 5 sessions a week, and no more than 2 a day
- EMF and flicker: Hooga claims 0.0 μT at 6 in. The product page calls the panel flicker-free, and the certifications page calls it low-flicker. No test report, instrument or method is published
- In the box: Panel, US power cord, series linking power cord, door mount, hanging kit with adjustable pulley, protective goggles and user manual
| - LEDs: 300 lenses with 600 chips. Mito says each lens holds two chips on separate circuits
- Wavelengths: 590, 630, 660, 810, 830 and 850 nm. Mito gives the split as 6%, 22%, 22%, 17%, 17% and 17%
- Modes and dimming: The touchscreen runs all six wavelengths (half red and amber, half near infrared), red and amber only, or near infrared only. The manual says red and near infrared each dim from 1 to 100%. The app adds NIR Extend: up to 20 minutes of near infrared with a 1-minute red break every 4 minutes
- Irradiance at 6 in: Mito lists >73 mW/cm² by professional spectroradiometer and >160 mW/cm² by consumer meter. The lab report Mito summarizes gives 53.5 mW/cm² average and 72.5 mW/cm² peak. Mito publishes no figure for any other distance
- Power: Mito lists 445 W. The lab measured 418.7 W at the wall. Input voltage isn't stated
- Size and coverage: 10 x 43 in and 25 lb. Mito rates it for full body, and the smaller 750X for upper or lower body
- Controls: Touchscreen with session timer, brightness control and alarm. One panel connects to the phone app by Bluetooth, and Mito's App Store listing shows the app as free with no in-app purchases. Running several panels together takes a wireless remote, which Mito includes only with 2- and 4-panel arrays
- Use guidance: 10-minute sessions at 12 to 18 in, at least 6 hours apart on the same area. The manual says 4 to 6 sessions a week, and the product page says 4 to 7. Mito advises no more than 15 minutes and never over 20. It gives the near-infrared-only cap as both 5 and 10 minutes
- In the box: Panel, power cable, user manual, over-the-door hook, steel hanging cables, 4 vinyl straps, opaque goggles and Mito Red IR3 glasses
- EMF and flicker: Mito says the panel emits 'no detectable EMF' at 6 in or more and is flicker-free, but publishes no measurements. The manual's only flicker entry, IEC 61000-3-3, tests the panel's effect on mains power, not light flicker
|
|---|
| Exact variant | Super Max (single model), 35.5 x 11.8 x 2.56 in panel with door mount | Single panel, sold as the PRO1500 in one configuration, with door mount and hanging kit, no stand | single 10 by 43 inch panel, with over-the-door hook and hanging cables, no stand |
|---|
| Dimensions | 91 x 30 x 6.5 cm (35.5 x 11.8 x 2.56 in) and 14 kg (31 lb), per the spec table on the product page. | 36 x 8.6 x 3.1 in and 21 lb, per Hooga's comparison chart and the table on its product page. Hooga's online store lists a weight of 13,154 g (about 29 lb) without saying whether that includes packaging. | 10 x 43 in (width x height, panel only) and 25 lb. Mito says to add about 6 to 8 in to the height on a floor or universal stand. It doesn't state the depth. Mito's lab-test table lists the panel as 42 x 9 in instead, without explaining the difference. |
|---|
| Installation | It hangs over a door from the included door mount, using braided steel cables, threaded posts and a height-adjusting pulley. The setup text says it can also stand on a solid surface. BON CHARGE's comparison table lists 'Door Mount' as the stand option for this model, and the product page lists no floor stand. It plugs in with the supplied power cord (AC 85–265 V). No dedicated circuit is described. | A door mount and a hanging kit with an adjustable pulley come in the box. The manual says to hang the kit and panel from the door mount, then plug the panel into any outlet. Mobile stands are sold separately. Input is AC 85–265 V, and no dedicated circuit or electrician is described. | An over-the-door hook, steel hanging cables and four vinyl straps come in the box. The manual shows how to hang the 1500X from a door but gives no weight limit for the hook. Mito's floor stand ($139) and universal vertical or horizontal stand ($349) fit the 1500X but cost extra. The panel plugs in with the supplied 16 AWG cord. Mito doesn't state input voltage, current draw or outlet needs. The only electrical rating in the manual is the 10 A, 250 V fuse. The manual gives an operating range of 45°F to 115°F. |
|---|
| Materials | Not stated by the manufacturer. | Not stated by the manufacturer. | Not stated by the manufacturer. |
|---|
| Warranty | 1-year manufacturer's warranty. The product-page FAQ says it runs from the date of purchase, but the store's refund policy says one year from delivery. To claim under the policy, you email BON CHARGE and return the product at your own cost within the warranty period. BON CHARGE then repairs, replaces or refunds at its option, and it pays shipping back on repaired or replaced items. Products used contrary to instructions, abused, modified, damaged or fitted with substitute parts aren't covered. | Three years on the PRO1500, per the product page, the store listing and the manual. The manual counts the three years from delivery and says the warranty covers all parts and labor. Hooga's warranty page says coverage starts on the date of purchase, with no activation step. Abuse, misuse, modification, drops and non-Hooga parts aren't covered. If Hooga needs the panel back, you pay to ship it. Claims go by email to contact@hoogahealth.com. | Three years on MitoPRO X panels, starting on the delivery date. It covers defects in material or workmanship under normal use, for the original purchaser only. Negligence, improper maintenance, modification, theft and loss aren't covered. Mito doesn't repair panels or supply parts. It replaces eligible units, and you send back the whole product. Mito pays for the return label only in the first 180 days. Claims start by email to info@mitoredlight.com, and Mito may ask for photos or video of the defect. |
|---|
| Returns | You can return items within 30 days of receipt for an exchange, refund or store credit, and you pay return shipping. The refund policy names no restocking fee. Items from bundles, promotions or free gifts must come back unused and in original condition. Report a faulty product within 14 days of delivery. If an item is found faulty, BON CHARGE pays the return shipping. General condition requirements for a standard return weren't confirmed. | 60 days from delivery. The panel must be in the condition you received it, in its original packaging. Returns aren't free: Hooga deducts the return shipping cost from your refund once it receives the item. US customers can print a prepaid label at Hooga's discounted rates. The policy also says 'open-box items cannot be refunded'. It doesn't say whether that covers any panel you've unboxed during the 60 days or only units sold as open-box. Items that aren't in original condition, or come back after 60 days, get only a partial refund. Approved refunds go back to the original payment method within 3 to 5 business days. | 60-day trial from delivery, with no restocking fee. The return must be postmarked within the 60 days and go back in the original packaging. You pay return shipping unless you added Free Returns & Package Protection at checkout. Mito doesn't state that option's price. Shipping fees and the protection fee aren't refunded. Shipping damage must be reported within 10 days of delivery. |
|---|
| Unresolved questions | - Delivered irradiance at BON CHARGE's 3 to 12 in use distance
- Measured wall power draw during a session
- Recommended session length and frequency
- General condition requirements for a standard return
- What it costs to ship the panel back
- Housing material
- The door mount's weight rating
- The FDA product code or listing number behind the 'FDA Class II registered' statement
| - How the irradiance figures were measured, and with what instrument
- Actual wall power draw, given the 530 W and 300 W figures
- How output splits between red and near infrared
- Housing material
- The door mount's weight rating
- Fan noise
- What return shipping costs for a 21 lb panel
- Whether 'open-box items cannot be refunded' applies to a panel you've unboxed and tried
- Which models the scanned FCC, CE and RoHS certificates name
- The FDA listing record itself, which Hooga shares only on request
| - Irradiance at the recommended 12 to 18 in
- Input voltage and plug type
- Panel depth and housing material
- Fan noise
- Measured light flicker and EMF
- The price of the optional return protection
- Whether the wireless remote is sold on its own, and its price
- The door hook's weight limit
- Whether the near-infrared-only cap is 5 or 10 minutes
- Which standards UL's medical equipment listing covers
- Why the lab-test table lists 42 x 9 in and only 660 and 850 nm
- The spectroradiometer model behind the lab figures
|
|---|