SIDE BY SIDE

Compare products.

See prices, running costs, specifications and trade-offs side by side. Choose two to four products of the same type.

Change products

Product 1Product 2Product 3 (optional)Product 4 (optional)

Installed infrared cabin

Sunlighten Amplify II

2-person installed infrared cabin, black Obsidian exterior with eucalyptus interior, no red-light option

$5,999US price, checked Oct 13, 2026

Two-person cabin with eight heaters on a dedicated 120 V circuit

Check price at Sunlighten Full review →

Installed infrared cabin

Sunlighten Amplify RED III

3-person infrared cabin with integrated red-light configuration

$8,599US price, checked Oct 13, 2026

Three-person cabin with built-in red light that needs a 240 V circuit

Check price at Sunlighten Full review →

Criterion	Sunlighten Amplify II	Sunlighten Amplify RED III
US price	$5,999Checked Oct 13, 2026 · Price details in the review	$8,599Checked Oct 13, 2026 · Price details in the review
Three-year ownership estimate	$5,999 Incomplete known subtotal. Not included: installation, energy use.	$8,599 Incomplete known subtotal. Not included: installation, energy use.
Choose if	Two people with a dedicated 120 V, 20 A circuit, about 51 × 46 in of indoor floor and a paved path for freight.	Two or three people who want red light built into their sauna and can add a dedicated 240 V, 20 A circuit.
Main trade-off	Opened saunas can't be returned, warranty labor is on you, and the panel magnets can affect pacemakers.	You pay $1,600 extra for red light with no published wavelength or dose, and opened saunas can't be returned.
Key specifications	Heaters: 5 SoloCarbon far-infrared heaters and 3 halogen full-spectrum heaters. Wattage of each isn't stated Electrical: 120 V, 1,880 W, 15.67 A. Dedicated 120 V, 20 A circuit with a NEMA 5-20R outlet Inside and seating: 45.4 W × 39.9 D × 70.3 H in. One bench, 45.2 W × 20.3 D in and 19.5 in high, for one or two people Weight: 541 lb Delivery and assembly: Freight on a pallet to your garage or a flat, paved spot on the driveway. Two people assemble it in about 2 to 3 hours Options: Eucalyptus or Obsidian at the same price, basswood $200 less. Integrated red light isn't available. The 3-person size costs $1,000 more Extras: Bluetooth sound system, chromotherapy lights and controls that let you lower the temperature Warranty (home use): 7 years on cabinet and heaters, 3 years on controls, 1 year on glass door and audio. Labor not covered	Heaters: 7 far-infrared, 5 near-infrared red-light and 3 full-spectrum heaters. The red light's wavelength and output aren't stated Electrical: 240 V, 3,465 W and 14.44 A, on a dedicated 20 A circuit with a NEMA 6-20R outlet Inside and bench: 56.8 W × 39.9 D × 70.3 H in inside. The bench is 56.6 W × 20.2 D in and 19.5 in off the floor Top temperature: Up to 170°F, which Sunlighten qualifies with "in ideal conditions" Heat-up: Sunlighten suggests preheating for 45 to 60 minutes. It says the cabin warms about one degree per minute, depending on room temperature Weight and delivery: 710 lb in two to three boxes on a pallet, left in your garage or driveway. Two people assemble it in about 2 to 3 hours Extras: Chromotherapy lighting and a sound system Options: The 2-person Amplify RED II costs $900 less and the 4-person Amplify RED IV $1,700 more. Without red light, the same-size Amplify III Eucalyptus is $1,600 less
Exact variant	2-person installed infrared cabin, black Obsidian exterior with eucalyptus interior, no red-light option	3-person infrared cabin with integrated red-light configuration
Dimensions	Outside: 50.9 W × 45.9 D × 77.7 H in, including 2 in feet. Inside: 45.4 W × 39.9 D × 70.3 H in. The door opening is 28 in. The bench is 45.2 in wide and 20.3 in deep, 19.5 in off the floor. It weighs 541 lb. Sunlighten says it fits under a standard 8 ft ceiling and its panels fit through a standard 30 in doorway. The product page gives no clearance to leave around the cabin.	Outside: 62.3 W × 45.9 D × 77.7 H in, including 2 in feet. Inside: 56.8 W × 39.9 D × 70.3 H in. The door opening is 28 in. The bench is 56.6 in wide and 20.2 in deep, 19.5 in off the floor. The eucalyptus model weighs 710 lb. Sunlighten says it fits under a standard 8 ft ceiling and its panels fit through a standard 30 in doorway. The product page gives no clearance to leave around the cabin.
Installation	It needs a dedicated 120 V, 20 A circuit with a NEMA 5-20R outlet. Sunlighten rates it at 1,880 W and 15.67 A. The product page tells you to book an electrician so the outlet is ready, but doesn't mention GFCI protection. Under Sunlighten's warranty, a power strip, extension cord, converter or non-dedicated circuit voids coverage. So does placing it within 5 ft of a shower, bathtub or cold plunge. Sunlighten says its saunas aren't designed to be placed outdoors. If you put one outside anyway, its separately sold cover and plastic sheet must stay on, even during sessions, or the warranty is void. Freight needs a flat, paved surface up to your garage door. The carrier leaves the sauna on a pallet in the garage or on the driveway and can't take it up steps. A local agent calls to schedule delivery. It ships in two to three boxes of 130 lb each, and Sunlighten says to have at least two people to unpack. The Magne-Seal panels lock together without screws or nails. Sunlighten says two people take about 2 to 3 hours. Its support page links an owner's manual, spec sheet, assembly guide and power box guide, but those PDFs couldn't be opened for this review.	It needs a dedicated 240 V, 20 A circuit and a NEMA 6-20R outlet for its 6-20P plug. Sunlighten tells you to book your electrician early so the outlet is ready on build day. Its FAQ says a power strip or converter voids the warranty. The warranty page also rules out extension cords and non-dedicated circuits. It requires at least 5 ft between the sauna and any source of water or vapor. The product page doesn't mention GFCI protection or clearance around the cabin. Freight arrives in two to three large boxes on a pallet, left in your garage or on a flat, paved driveway spot. The carrier calls first to schedule. The panels lock together with Magne-Seal corners, without screws or nails. Sunlighten says two people take about 2 to 3 hours. Its guides page has manuals and assembly guides for the standard Amplify II, III and IV, but none listed under Amplify RED.
Materials	The outside has a limited-edition black finish that Sunlighten calls Obsidian. The inside is natural eucalyptus, which Sunlighten says is sustainably sourced. Plain eucalyptus costs the same, and basswood is $200 less. It comes with a CELLIANT heater cover.	Eucalyptus tongue-and-groove boards on solid wood framing, which Sunlighten calls sustainably sourced and non-toxic. Basswood and Obsidian finishes were marked not available for this model. One line on the page says its saunas are made of basswood, which conflicts with the eucalyptus selection. Sunlighten says the glue on its boards was third-party tested by Franklin International.
Warranty	The product page shows a 7-year warranty badge. Sunlighten's warranty page groups Amplify with its other cabin saunas. For home use, the cabinet and heaters get 7 years. The cabinet includes the benches, floor grates and heater cover frames. The controls (in-sauna tablet, control pad and power box) get 3 years. The glass door and audio get 1 year, and chromotherapy lighting has its own 1-year term. Commercial use gets 5 years on the cabinet and heaters and 1 year on everything else. The warranty's disclaimers say labor and technician costs aren't covered. You pay all freight, including on parts shipped for service. Coverage is for the original buyer only and ends if you sell the sauna. It's void on a power strip, extension cord, converter or non-dedicated circuit, or within 5 ft of a shower, bathtub or cold plunge. Sunlighten says its saunas aren't designed for outdoor use. Outside, the separately sold cover and its plastic sheet must stay on at all times. The sauna must be bought and put into use within a year of its manufacture date.	Sunlighten's warranty page groups Amplify with its other cabin saunas. For home use, the cabinet and heaters get 7 years, the controls 3 years, and the glass door and audio 1 year. Cabinetry includes benches, floor grates and heater cover frames. Controls include the control pad, in-sauna tablet and power box. Commercial use gets 5 years on the cabinet and heaters and 1 year on everything else. The cabin terms don't single out the red-light heaters. The general terms cover replacement parts only. Labor and technician costs aren't covered. You pay all freight, including on parts shipped for service. Coverage is for the original buyer only and ends if you sell the sauna. It's void on a power strip, extension cord, converter or non-dedicated circuit, or within 5 ft of water. Outdoors, the plastic sheet of the sauna cover (sold separately) must stay on at all times, even during sessions. The sauna must be bought and put into use within a year of its manufacture date. The page shows no version or effective date.
Returns	You have 30 days from delivery to start a return or exchange, and the sauna must be in its original, unopened packaging. Opened saunas can't be returned or exchanged. Returns, exchanges and cancellations may carry a 3% administrative fee and a $499 restocking fee for each Amplify sauna. Storage fees for re-routing the sauna and return shipping to the warehouse may also apply. Exchanges can add shipping back to you. If it hasn't shipped, you cancel by emailing your sales representative, or through Sunlighten's order portal if you don't have one. Refunds go to the original payment method once the sauna is received, inspected and restocked, with no stated timeframe. Sunlighten reserves the right to refuse a return, exchange or cancellation.	Non-custom saunas can be returned within 30 days of delivery, but only unopened in the original packaging. Opened saunas can't be returned. Fees can include a 3% administrative fee, a $499 restocking fee per Amplify sauna, storage fees and return shipping. Cancelling before it ships can cost the 3% fee, plus storage fees if it has to be rerouted.
Unresolved questions	The maximum cabin temperature The wattage of each heater and average power use during a session Measured EMF or ELF values and how they were tested Whether an ETL or UL listing covers this exact model, and its file number How much clearance it needs and whether it needs GFCI protection Carton weights, since two to three boxes at 130 lb each don't add up to the 541 lb listed weight Whether the $5,999 sale price lasts past the October 14 sale	The red-light heaters' wavelength and irradiance, and whether they run at the same time as the far-infrared heaters Average power use during a session, and so the yearly running cost Whether the circuit needs GFCI protection, and how much clearance to leave around the cabin What the linked Amplify RED III spec sheet adds, since it couldn't be opened on Oct 13, 2026 Whether an ETL listing covers this exact model, and its file number What the Vitatech EMF test measured, at what distance, and whether it included the red-light heaters Whether it's in stock, since the product page and Sunlighten's store listing disagreed The lifespan and replacement price of the full-spectrum and red-light heaters Whether the $8,599 sale price lasts past the October 14 event

These comparisons use published specifications, not head-to-head tests. Prices and terms are dated. Unknown costs are not zero. Check the exact variant before you buy.