SIDE BY SIDE

Compare products.

See prices, running costs, specifications and trade-offs side by side. Choose two to four products of the same type.

Change products

Product 1Product 2Product 3 (optional)Product 4 (optional)

Panel

Joovv Solo 3.0

Single standalone panel, with no kit, mount or stand add-on

$1,699US price, checked Oct 13, 2026

Mid-size modular red and NIR panel with app control

Check price at Joovv Full review →

Panel

MitoPRO 300X

MitoPRO 300X targeted 9.5 by 14.5 inch panel, with tabletop stand

$449US price, checked Oct 13, 2026

Compact six-wavelength tabletop panel for the face, neck or a joint

Check price at Mito Red Light Full review →

Criterion	Joovv Solo 3.0	MitoPRO 300X
US price	$1,699Checked Oct 13, 2026 · Price details in the review	$449Checked Oct 13, 2026 · Price details in the review
Three-year ownership estimate	$1,699 Incomplete known subtotal. Not included: installation, other annual costs, energy use.	$452.45 Planning total. Electricity assumption: $0.18/kWh.
Choose if	You want a mid-size, app-controlled panel you can pair with more Joovv panels later, and you value the stated safety certification and the HSA/FSA payment option.	You want a small, dimmable panel for your face or a joint that sits on a table, with a three-year warranty.
Main trade-off	It costs more than larger rival panels, publishes no wavelengths or wattage, and lists no mounting hardware in the box, so a mount or stand may cost extra.	It covers only small areas, and Mito doesn't publish output at the 12 to 18 inches it recommends.
Key specifications	LED count: 150 (product tag on Joovv's store) Light type: Red and near-infrared. Wavelengths aren't published on the product page Irradiance: Over 100 mW/cm², from a product tag on Joovv's store. No measurement distance given Modes: Recovery+ (pulsing LEDs), Ambient Mode, Alarm Clock and an NIR mode. Joovv says to use eye protection when NIR mode, including Recovery+, is active Control and pairing: iOS and Android app. Pairs with other Joovv devices by Bluetooth or hardwire cables Safety certification: Joovv says Intertek tested and certified its Generation 3.0 devices to applicable IEC 60601 medical electrical safety requirements FDA GUDID record: Product code ILY ("Lamp, Infrared, Therapeutic Heating"). Exempt from premarket submission, over the counter and in commercial distribution	LEDs: 60 lenses / 120 chips. Each lens holds two chips on separate circuits, so the panel can run 100% red, 100% near infrared or 50% each Peak wavelengths: 590, 630, 660, 810, 830 and 850 nm. Mito gives the split for the whole MitoPRO X series as 6%, 22%, 22%, 17%, 17% and 17% Irradiance at 6 in: >130 mW/cm² by consumer solar meter and >56 mW/cm² by professional spectroradiometer. Mito reports a LightLab test (report LLIA002765-005, Sep 12, 2025) of 38.2 mW/cm² average and 55.9 mW/cm² peak over the area below the LEDs Power: 125 W power consumption on the product page. The LightLab test measured 111.8 W wall draw and 36.4 W total radiant power Coverage and distance: Face, neck or joints. Mito recommends 10-minute sessions at 12 to 18 in. The manual says 4 to 6 sessions a week, and the product page says 4 to 7 Controls and modes: Touchscreen with three modes: all wavelengths, red and amber only, or near infrared only. The manual gives dimming from 1% to 100%, plus near-infrared pulsing. The Bluetooth app adds an NIR Extend mode of up to 20 minutes. Mito's App Store listing shows the app as free with no in-app purchases In the box: Panel, tabletop stand, power cable, user manual, opaque protective goggles and Mito Red IR3 glasses
Exact variant	Single standalone panel, with no kit, mount or stand add-on	MitoPRO 300X targeted 9.5 by 14.5 inch panel, with tabletop stand
Dimensions	8.75 × 36 in, from a product tag on Joovv's online store. Depth isn't stated. The store also gives a weight of 25 lb but doesn't say whether that's the panel or the packed shipment.	9.5 x 14.5 in (width x height, panel only) and 7 lb, per the product page. Mito says to add about 6 to 8 in to the height if you use its floor or universal stand. It doesn't state panel depth.
Installation	No electrical work is described. The product page has separate "Choose your kit" and "Choose your setup" selectors. Product tags on Joovv's online store name door, wall, stand and tabletop-stand setups. Setup prices weren't shown in the page text reviewed. In-box contents aren't stated, including any mounting hardware.	The 300X comes with a tabletop stand. The manual says to pull it out and set the panel on a level surface. The manual's door-hanging steps cover only the 750X and 1500X. The $139 floor stand is listed for those two panels only. The $349 universal stand fits every MitoPRO X size. The panel plugs in with the supplied 16 AWG power cord. Mito doesn't state input voltage or amperage, and it doesn't call for a dedicated circuit.
Materials	Not stated by the manufacturer	Not stated by the manufacturer.
Warranty	2-year warranty, per the product page badge and a product tag on Joovv's store. Coverage terms and exclusions weren't captured.	Three years on MitoPRO X panels, starting on the delivery date. It covers only the original purchaser who bought from mitoredlight.com or an authorized reseller, and it can't be transferred. It covers defects in material or workmanship under normal use, but not negligence, improper maintenance, modification, theft or loss. Mito doesn't repair units or supply parts. It replaces an eligible panel with a brand-new one. You send back the whole product with all its parts. Mito pays the postage for the first 180 days. After that, you pay to ship it in. Claims start by email to info@mitoredlight.com.
Returns	A product tag on Joovv's online store lists a 60-day trial period. The product page links to a Returns page but gives no return conditions or return-shipping costs.	60 days from delivery, postmarked within the window, with no restocking fee. The panel must come back in its original packaging, and damaged or unsellable returns are refused. Return shipping is on you unless you bought Free Returns & Package Protection at checkout. The policy page doesn't price that option, and its fee isn't refunded. Original shipping fees aren't refunded either. Refunds go to your original payment method, and Mito says to allow up to 5 business days.
Unresolved questions	Wavelengths and the red and NIR mix Power draw in watts Outlet requirements Irradiance at a stated distance Recommended session length Panel depth Whether the 25 lb catalog weight is the panel or the shipped box In-box contents, including any mounting hardware or eyewear Return conditions and return-shipping costs Warranty exclusions Whether the companion app carries any fee Device-specific clinical evidence, which wasn't reviewed	Irradiance at the recommended 12 to 18 in Whether LightLab tested the current six-wavelength 300X or an earlier two-wavelength unit Input voltage and plug type Panel depth and housing material Whether the 300X ships with the door hook and cables in the manual's general box list Fan noise Near-infrared pulse frequency What the optional return protection costs Who tested the panel to the IEC 60601 standards Mito lists

These comparisons use published specifications, not head-to-head tests. Prices and terms are dated. Unknown costs are not zero. Check the exact variant before you buy.