SIDE BY SIDE

Compare products.

See prices, running costs, specifications and trade-offs side by side. Choose two to four products of the same type.

Change products

Product 1Product 2Product 3 (optional)Product 4 (optional)

Panel

Kala Red Light Elite Panel

'No Stand' setup option with hanging kit, US store

$1,139.99US price, checked Oct 13, 2026

Full-length red and near-infrared panel on sale, with an unconfirmed 'FDA Cleared' badge

Check price at Kala Full review →

Our pick for half your body at a time

MitoPRO 750X

MitoPRO 750X single panel, 10 x 23 in, with over-the-door hook and hanging cables, no stand

$749US price, checked Oct 13, 2026

Mid-size six-wavelength panel for one body half per session

Check price at Mito Red Light Full review →

Criterion	Kala Red Light Elite Panel	MitoPRO 750X
US price	$1,139.99Checked Oct 13, 2026 · Price details in the review	$749Checked Oct 13, 2026 · Price details in the review
Three-year ownership estimate	$1,139.99 Incomplete known subtotal. Not included: installation, energy use.	$756.54 Planning total. Electricity assumption: $0.18/kWh.
Choose if	You want a full-length 660 and 850 nm panel, on sale for several hundred dollars less than a Joovv Solo 3.0 or BON CHARGE Super Max, and you can hang it with the included kit and wait for delivery.	You want a mid-size, door-hung panel for one body half per session, with a three-year warranty and a 60-day trial.
Main trade-off	Power draw and the FDA badge are unclear for this model, the backorder notice leaves delivery timing uncertain, and returns need RMA pre-approval and cost a $15 restocking fee plus return shipping.	Full-body use means repositioning or buying the 1500X, voltage and depth aren't published, and you pay return shipping unless you bought the optional protection.
Key specifications	LEDs: 231 Wavelengths: 660 nm red and 850 nm near infrared, 1:1 ratio Irradiance: 161 mW/cm² at 6 in, per Kala. The page doesn't say who measured it or with what instrument Use distance: Kala recommends about 6 to 18 in from the panel Power: The only wattage figure is 'Light output: 385W (2315W)', but 231 x 5 W would be 1,155 W. No power-consumption figure is given. Input is 100–240 V AC, 50/60 Hz Timer and modes: 5, 10, 15 or 20 minute sessions, seven frequency settings and a pulse recovery mode. Digital timer and remote control, though the page says the panel controller doesn't include a battery EMF: '0.00 at 4 inches', with no unit given In the box*: Panel, user manual, hanging kit, protective goggles, charger and wall adapter, power cord	LEDs: 150 lenses / 300 chips Peak wavelengths: 590, 630, 660, 810, 830 and 850 nm. Mito gives the split for the whole MitoPRO X series as 6%, 22%, 22%, 17%, 17% and 17% Power consumption: 225 W Irradiance at 6 in: >70 mW/cm² by professional laboratory spectroradiometer and >160 mW/cm² by consumer-level (solar) light meter. Mito shows the two figures side by side Modes: All wavelengths (50% red/amber, 50% NIR), 100% red/amber or 100% NIR. NIR-only is limited to 5 minutes on the panel. The app's NIR Extend mode runs NIR for up to 20 minutes, cycling briefly to red every 4 minutes. Mito's App Store listing shows the app as free with no in-app purchases Coverage per session: Upper or lower body. Mito's FAQ says to stand 12 to 18 in from the panel In the box: Panel, power cable, user manual, over-the-door hook, steel hanging cables, 4 vinyl hanging straps, opaque protective goggles, Mito Red IR3 glasses
Exact variant	'No Stand' setup option with hanging kit, US store	MitoPRO 750X single panel, 10 x 23 in, with over-the-door hook and hanging cables, no stand
Dimensions	Listed as 'L220W96H900mm', about 8.7 x 3.8 x 35.4 in. The 96 mm figure is labeled width but reads as the panel's depth. The spec list gives the weight as 30 lb, but Kala's online store lists 9,952 g (about 21.9 lb) for every setup option.	10 x 23 in (width x height, panel only) and 15 lb. Mito says to add about 6 to 8 in to the height when the panel sits on a floor or universal stand. Mito doesn't state panel depth.
Installation	The 'No Stand' setup includes a hanging kit. The page doesn't say what it hangs from (door, wall or ceiling) or whether you'll need to drill. Roller Boot, Vertical Stand and Horizontal Stand are separate setup options at higher prices. The panel plugs in at 100–240 V AC, 50/60 Hz, and no dedicated circuit is described.	It hangs over a door from the included over-the-door hook, steel hanging cables and 4 vinyl hanging straps. Floor and universal stands are sold separately, and you don't need one. The product page shows the floor stand at $139 and the universal stand at $349. It plugs in with the supplied power cable. Mito doesn't state input voltage, amperage or outlet requirements, and no dedicated circuit is described.
Materials	Iron shell, with lenses at 30 and 60 degrees.	Not stated by the manufacturer.
Warranty	2 years, per the spec list on the product page. Kala's return policy says that outside the 30-day return window, its warranty program 'may cover repairs or replacements'. Final-sale items remain under warranty service, and you make a claim by emailing Kala with proof of purchase. Coverage details and exclusions weren't found. The shipping page whose web address mentions warranty gives no warranty terms.	3-year warranty on MitoPRO X panels, starting on the delivery date. It's valid only for the original purchaser. It covers defects in material or workmanship under normal use, but not damage from negligence, improper maintenance or modification. Mito doesn't repair units or supply parts. It replaces eligible products with a new unit, and you must return the entire product with all its components. Mito pays for the return postage label only in the first 180 days.
Returns	You can return it within 30 days of delivery for a refund if you bought it directly from kalaredlight.com. It has to be in like-new condition, with all original accessories, manuals and packaging. You need pre-approval through Kala's RMA process first. Then you have 14 days from receiving the RMA to send it back by a trackable method. A $15 restocking fee applies to all returns, and you pay return shipping. Duties and taxes aren't refunded. Kala lists its Vertical and Horizontal Stands, and Kala Goggles, as final sale. The two policy pages give different refund timings after inspection: 5 to 10 business days, or typically within 14 business days.	60-day trial from the delivery date, with no restocking fee. You get a full refund if the device goes back in its original packaging, postmarked within the 60 days. You pay return shipping unless you bought Free Returns & Package Protection at checkout. Shipping fees and the protection fee aren't refunded.
Unresolved questions	Measured wall power draw during a session What the hanging kit attaches to The hanging kit's weight rating Warranty coverage details and exclusions Who pays shipping on warranty claims When it would actually ship under the backorder notice How many sessions per day or week Kala recommends (the FAQ entry on daily use showed no answer) Whether the FDA device-identifier record for 'KALA Elite' covers the unit sold on the US store, since the store's barcode doesn't match the record's identifier How the 161 mW/cm² figure was measured Delivered irradiance at 12 to 18 in, the far end of Kala's use distance Panel weight: 30 lb in the spec list, but 9,952 g (about 21.9 lb) for every setup option in Kala's online store	Delivered irradiance at the recommended 12 to 18 in distance Measured wall power draw Input voltage and plug type Panel depth Housing material Fan noise The FDA listing or product code behind the 'FDA Class II Registered' statement

These comparisons use published specifications, not head-to-head tests. Prices and terms are dated. Unknown costs are not zero. Check the exact variant before you buy.