SIDE BY SIDE

Compare products.

See prices, running costs, specifications and trade-offs side by side. Choose two to four products of the same type.

Change products

Product 1Product 2Product 3 (optional)Product 4 (optional)

Panel

Kala Red Light Elite Panel

'No Stand' setup option with hanging kit, US store

$1,139.99US price, checked Oct 13, 2026

Full-length red and near-infrared panel on sale, with an unconfirmed 'FDA Cleared' badge

Check price at Kala Full review →

Our full-body panel pick

MitoPRO 1500X

single 10 by 43 inch panel, with over-the-door hook and hanging cables, no stand

$1,299US price, checked Oct 13, 2026

Full-body six-wavelength panel with a door-hanging kit and lab-tested output

Check price at Mito Red Light Full review →

Criterion	Kala Red Light Elite Panel	MitoPRO 1500X
US price	$1,139.99Checked Oct 13, 2026 · Price details in the review	$1,299Checked Oct 13, 2026 · Price details in the review
Three-year ownership estimate	$1,139.99 Incomplete known subtotal. Not included: installation, energy use.	$1,310.55 Planning total. Electricity assumption: $0.18/kWh.
Choose if	You want a full-length 660 and 850 nm panel, on sale for several hundred dollars less than a Joovv Solo 3.0 or BON CHARGE Super Max, and you can hang it with the included kit and wait for delivery.	You want one door-hung panel for full-body sessions, with dimmable red and near-infrared light and a three-year warranty.
Main trade-off	Power draw and the FDA badge are unclear for this model, the backorder notice leaves delivery timing uncertain, and returns need RMA pre-approval and cost a $15 restocking fee plus return shipping.	Mito publishes no output figure at its recommended distance, and returning the 25 lb panel costs you shipping without the optional protection.
Key specifications	LEDs: 231 Wavelengths: 660 nm red and 850 nm near infrared, 1:1 ratio Irradiance: 161 mW/cm² at 6 in, per Kala. The page doesn't say who measured it or with what instrument Use distance: Kala recommends about 6 to 18 in from the panel Power: The only wattage figure is 'Light output: 385W (2315W)', but 231 x 5 W would be 1,155 W. No power-consumption figure is given. Input is 100–240 V AC, 50/60 Hz Timer and modes: 5, 10, 15 or 20 minute sessions, seven frequency settings and a pulse recovery mode. Digital timer and remote control, though the page says the panel controller doesn't include a battery EMF: '0.00 at 4 inches', with no unit given In the box*: Panel, user manual, hanging kit, protective goggles, charger and wall adapter, power cord	LEDs: 300 lenses with 600 chips. Mito says each lens holds two chips on separate circuits Wavelengths: 590, 630, 660, 810, 830 and 850 nm. Mito gives the split as 6%, 22%, 22%, 17%, 17% and 17% Modes and dimming: The touchscreen runs all six wavelengths (half red and amber, half near infrared), red and amber only, or near infrared only. The manual says red and near infrared each dim from 1 to 100%. The app adds NIR Extend: up to 20 minutes of near infrared with a 1-minute red break every 4 minutes Irradiance at 6 in: Mito lists >73 mW/cm² by professional spectroradiometer and >160 mW/cm² by consumer meter. The lab report Mito summarizes gives 53.5 mW/cm² average and 72.5 mW/cm² peak. Mito publishes no figure for any other distance Power: Mito lists 445 W. The lab measured 418.7 W at the wall. Input voltage isn't stated Size and coverage: 10 x 43 in and 25 lb. Mito rates it for full body, and the smaller 750X for upper or lower body Controls: Touchscreen with session timer, brightness control and alarm. One panel connects to the phone app by Bluetooth, and Mito's App Store listing shows the app as free with no in-app purchases. Running several panels together takes a wireless remote, which Mito includes only with 2- and 4-panel arrays Use guidance: 10-minute sessions at 12 to 18 in, at least 6 hours apart on the same area. The manual says 4 to 6 sessions a week, and the product page says 4 to 7. Mito advises no more than 15 minutes and never over 20. It gives the near-infrared-only cap as both 5 and 10 minutes In the box: Panel, power cable, user manual, over-the-door hook, steel hanging cables, 4 vinyl straps, opaque goggles and Mito Red IR3 glasses EMF and flicker: Mito says the panel emits 'no detectable EMF' at 6 in or more and is flicker-free, but publishes no measurements. The manual's only flicker entry, IEC 61000-3-3, tests the panel's effect on mains power, not light flicker
Exact variant	'No Stand' setup option with hanging kit, US store	single 10 by 43 inch panel, with over-the-door hook and hanging cables, no stand
Dimensions	Listed as 'L220W96H900mm', about 8.7 x 3.8 x 35.4 in. The 96 mm figure is labeled width but reads as the panel's depth. The spec list gives the weight as 30 lb, but Kala's online store lists 9,952 g (about 21.9 lb) for every setup option.	10 x 43 in (width x height, panel only) and 25 lb. Mito says to add about 6 to 8 in to the height on a floor or universal stand. It doesn't state the depth. Mito's lab-test table lists the panel as 42 x 9 in instead, without explaining the difference.
Installation	The 'No Stand' setup includes a hanging kit. The page doesn't say what it hangs from (door, wall or ceiling) or whether you'll need to drill. Roller Boot, Vertical Stand and Horizontal Stand are separate setup options at higher prices. The panel plugs in at 100–240 V AC, 50/60 Hz, and no dedicated circuit is described.	An over-the-door hook, steel hanging cables and four vinyl straps come in the box. The manual shows how to hang the 1500X from a door but gives no weight limit for the hook. Mito's floor stand ($139) and universal vertical or horizontal stand ($349) fit the 1500X but cost extra. The panel plugs in with the supplied 16 AWG cord. Mito doesn't state input voltage, current draw or outlet needs. The only electrical rating in the manual is the 10 A, 250 V fuse. The manual gives an operating range of 45°F to 115°F.
Materials	Iron shell, with lenses at 30 and 60 degrees.	Not stated by the manufacturer.
Warranty	2 years, per the spec list on the product page. Kala's return policy says that outside the 30-day return window, its warranty program 'may cover repairs or replacements'. Final-sale items remain under warranty service, and you make a claim by emailing Kala with proof of purchase. Coverage details and exclusions weren't found. The shipping page whose web address mentions warranty gives no warranty terms.	Three years on MitoPRO X panels, starting on the delivery date. It covers defects in material or workmanship under normal use, for the original purchaser only. Negligence, improper maintenance, modification, theft and loss aren't covered. Mito doesn't repair panels or supply parts. It replaces eligible units, and you send back the whole product. Mito pays for the return label only in the first 180 days. Claims start by email to info@mitoredlight.com, and Mito may ask for photos or video of the defect.
Returns	You can return it within 30 days of delivery for a refund if you bought it directly from kalaredlight.com. It has to be in like-new condition, with all original accessories, manuals and packaging. You need pre-approval through Kala's RMA process first. Then you have 14 days from receiving the RMA to send it back by a trackable method. A $15 restocking fee applies to all returns, and you pay return shipping. Duties and taxes aren't refunded. Kala lists its Vertical and Horizontal Stands, and Kala Goggles, as final sale. The two policy pages give different refund timings after inspection: 5 to 10 business days, or typically within 14 business days.	60-day trial from delivery, with no restocking fee. The return must be postmarked within the 60 days and go back in the original packaging. You pay return shipping unless you added Free Returns & Package Protection at checkout. Mito doesn't state that option's price. Shipping fees and the protection fee aren't refunded. Shipping damage must be reported within 10 days of delivery.
Unresolved questions	Measured wall power draw during a session What the hanging kit attaches to The hanging kit's weight rating Warranty coverage details and exclusions Who pays shipping on warranty claims When it would actually ship under the backorder notice How many sessions per day or week Kala recommends (the FAQ entry on daily use showed no answer) Whether the FDA device-identifier record for 'KALA Elite' covers the unit sold on the US store, since the store's barcode doesn't match the record's identifier How the 161 mW/cm² figure was measured Delivered irradiance at 12 to 18 in, the far end of Kala's use distance Panel weight: 30 lb in the spec list, but 9,952 g (about 21.9 lb) for every setup option in Kala's online store	Irradiance at the recommended 12 to 18 in Input voltage and plug type Panel depth and housing material Fan noise Measured light flicker and EMF The price of the optional return protection Whether the wireless remote is sold on its own, and its price The door hook's weight limit Whether the near-infrared-only cap is 5 or 10 minutes Which standards UL's medical equipment listing covers Why the lab-test table lists 42 x 9 in and only 660 and 850 nm The spectroradiometer model behind the lab figures

These comparisons use published specifications, not head-to-head tests. Prices and terms are dated. Unknown costs are not zero. Check the exact variant before you buy.