SIDE BY SIDE

Compare products.

See prices, running costs, specifications and trade-offs side by side. Choose two to four products of the same type.

Change products

Product 1Product 2Product 3 (optional)Product 4 (optional)

Panel

Joovv Solo 3.0

Single standalone panel, with no kit, mount or stand add-on

$1,699US price, checked Oct 13, 2026

Mid-size modular red and NIR panel with app control

Check price at Joovv Full review →

Our full-body panel pick

MitoPRO 1500X

single 10 by 43 inch panel, with over-the-door hook and hanging cables, no stand

$1,299US price, checked Oct 13, 2026

Full-body six-wavelength panel with a door-hanging kit and lab-tested output

Check price at Mito Red Light Full review →

Criterion	Joovv Solo 3.0	MitoPRO 1500X
US price	$1,699Checked Oct 13, 2026 · Price details in the review	$1,299Checked Oct 13, 2026 · Price details in the review
Three-year ownership estimate	$1,699 Incomplete known subtotal. Not included: installation, other annual costs, energy use.	$1,310.55 Planning total. Electricity assumption: $0.18/kWh.
Choose if	You want a mid-size, app-controlled panel you can pair with more Joovv panels later, and you value the stated safety certification and the HSA/FSA payment option.	You want one door-hung panel for full-body sessions, with dimmable red and near-infrared light and a three-year warranty.
Main trade-off	It costs more than larger rival panels, publishes no wavelengths or wattage, and lists no mounting hardware in the box, so a mount or stand may cost extra.	Mito publishes no output figure at its recommended distance, and returning the 25 lb panel costs you shipping without the optional protection.
Key specifications	LED count: 150 (product tag on Joovv's store) Light type: Red and near-infrared. Wavelengths aren't published on the product page Irradiance: Over 100 mW/cm², from a product tag on Joovv's store. No measurement distance given Modes: Recovery+ (pulsing LEDs), Ambient Mode, Alarm Clock and an NIR mode. Joovv says to use eye protection when NIR mode, including Recovery+, is active Control and pairing: iOS and Android app. Pairs with other Joovv devices by Bluetooth or hardwire cables Safety certification: Joovv says Intertek tested and certified its Generation 3.0 devices to applicable IEC 60601 medical electrical safety requirements FDA GUDID record: Product code ILY ("Lamp, Infrared, Therapeutic Heating"). Exempt from premarket submission, over the counter and in commercial distribution	LEDs: 300 lenses with 600 chips. Mito says each lens holds two chips on separate circuits Wavelengths: 590, 630, 660, 810, 830 and 850 nm. Mito gives the split as 6%, 22%, 22%, 17%, 17% and 17% Modes and dimming: The touchscreen runs all six wavelengths (half red and amber, half near infrared), red and amber only, or near infrared only. The manual says red and near infrared each dim from 1 to 100%. The app adds NIR Extend: up to 20 minutes of near infrared with a 1-minute red break every 4 minutes Irradiance at 6 in: Mito lists >73 mW/cm² by professional spectroradiometer and >160 mW/cm² by consumer meter. The lab report Mito summarizes gives 53.5 mW/cm² average and 72.5 mW/cm² peak. Mito publishes no figure for any other distance Power: Mito lists 445 W. The lab measured 418.7 W at the wall. Input voltage isn't stated Size and coverage: 10 x 43 in and 25 lb. Mito rates it for full body, and the smaller 750X for upper or lower body Controls: Touchscreen with session timer, brightness control and alarm. One panel connects to the phone app by Bluetooth, and Mito's App Store listing shows the app as free with no in-app purchases. Running several panels together takes a wireless remote, which Mito includes only with 2- and 4-panel arrays Use guidance: 10-minute sessions at 12 to 18 in, at least 6 hours apart on the same area. The manual says 4 to 6 sessions a week, and the product page says 4 to 7. Mito advises no more than 15 minutes and never over 20. It gives the near-infrared-only cap as both 5 and 10 minutes In the box: Panel, power cable, user manual, over-the-door hook, steel hanging cables, 4 vinyl straps, opaque goggles and Mito Red IR3 glasses EMF and flicker: Mito says the panel emits 'no detectable EMF' at 6 in or more and is flicker-free, but publishes no measurements. The manual's only flicker entry, IEC 61000-3-3, tests the panel's effect on mains power, not light flicker
Exact variant	Single standalone panel, with no kit, mount or stand add-on	single 10 by 43 inch panel, with over-the-door hook and hanging cables, no stand
Dimensions	8.75 × 36 in, from a product tag on Joovv's online store. Depth isn't stated. The store also gives a weight of 25 lb but doesn't say whether that's the panel or the packed shipment.	10 x 43 in (width x height, panel only) and 25 lb. Mito says to add about 6 to 8 in to the height on a floor or universal stand. It doesn't state the depth. Mito's lab-test table lists the panel as 42 x 9 in instead, without explaining the difference.
Installation	No electrical work is described. The product page has separate "Choose your kit" and "Choose your setup" selectors. Product tags on Joovv's online store name door, wall, stand and tabletop-stand setups. Setup prices weren't shown in the page text reviewed. In-box contents aren't stated, including any mounting hardware.	An over-the-door hook, steel hanging cables and four vinyl straps come in the box. The manual shows how to hang the 1500X from a door but gives no weight limit for the hook. Mito's floor stand ($139) and universal vertical or horizontal stand ($349) fit the 1500X but cost extra. The panel plugs in with the supplied 16 AWG cord. Mito doesn't state input voltage, current draw or outlet needs. The only electrical rating in the manual is the 10 A, 250 V fuse. The manual gives an operating range of 45°F to 115°F.
Materials	Not stated by the manufacturer	Not stated by the manufacturer.
Warranty	2-year warranty, per the product page badge and a product tag on Joovv's store. Coverage terms and exclusions weren't captured.	Three years on MitoPRO X panels, starting on the delivery date. It covers defects in material or workmanship under normal use, for the original purchaser only. Negligence, improper maintenance, modification, theft and loss aren't covered. Mito doesn't repair panels or supply parts. It replaces eligible units, and you send back the whole product. Mito pays for the return label only in the first 180 days. Claims start by email to info@mitoredlight.com, and Mito may ask for photos or video of the defect.
Returns	A product tag on Joovv's online store lists a 60-day trial period. The product page links to a Returns page but gives no return conditions or return-shipping costs.	60-day trial from delivery, with no restocking fee. The return must be postmarked within the 60 days and go back in the original packaging. You pay return shipping unless you added Free Returns & Package Protection at checkout. Mito doesn't state that option's price. Shipping fees and the protection fee aren't refunded. Shipping damage must be reported within 10 days of delivery.
Unresolved questions	Wavelengths and the red and NIR mix Power draw in watts Outlet requirements Irradiance at a stated distance Recommended session length Panel depth Whether the 25 lb catalog weight is the panel or the shipped box In-box contents, including any mounting hardware or eyewear Return conditions and return-shipping costs Warranty exclusions Whether the companion app carries any fee Device-specific clinical evidence, which wasn't reviewed	Irradiance at the recommended 12 to 18 in Input voltage and plug type Panel depth and housing material Fan noise Measured light flicker and EMF The price of the optional return protection Whether the wireless remote is sold on its own, and its price The door hook's weight limit Whether the near-infrared-only cap is 5 or 10 minutes Which standards UL's medical equipment listing covers Why the lab-test table lists 42 x 9 in and only 660 and 850 nm The spectroradiometer model behind the lab figures

These comparisons use published specifications, not head-to-head tests. Prices and terms are dated. Unknown costs are not zero. Check the exact variant before you buy.